- Joined
- May 11, 2023
- Messages
- 1,696
- Reaction score
- 7,748
WHAT IS VPD:
VPD stands for Vapor Pressure Deficit. All gases have vapor pressures, but when we’re growing, we’re interested in water vapor. Vapor pressure deficit is the difference between the pressure of water vapor in 100% saturated air at a given temperature (basically a leaf’s vapor pressure) and the air’s actual vapor pressure. A high VPD value raises a plant’s transpiration rate and increases nutrient movement through the the plant’s xylem, while a low VPD value slows the movement of nutrients through the plant.
WHY SHOULD WE CARE:
VPD control is related to the following:
You reach expert growing level when you learn to manage humidity and VPD. Everybody spends their time managing temperature, nutrients, and whatever else, but the last little thing you learn to manage is humidity, and it is significantly more finicky.
HOW TO STEER PLANT GROWTH:
In order to stay on the same page, I should point out that relative humidity (RH) andVPD are inversely related. This means that when relative humidity (RH) is high, VPD is low, and vice versa.
When growers want to know how to steer plant growth, they are interested in maximizing growth. So let’s start with how the plants react to changes in VPD:
Effective VPD control is about balancing gas exchange. There is a “Goldilocks” zone where the plant is getting everything.
If your VPD is too low, then your plants aren’t going to acquire enough nutrients, slowing growth; if your VPD is too high, you’re going to stress the plant and the stomata will close, rendering your extra carbon dioxide ineffective. Like everything else with growing, there’s a Goldilocks zone. One VPD is too high, one VPD is too low, and one VPD is just right.
VPD IN DIFFERNT STAGES OF GROWTH:
Ideal KPA (kilopascals) ranges for different stages of growth.
As a matter of fact, most growers use some form of VPD control already, without even knowing it. When you put clones under a dome, you’re keeping the RH high and the VPD low. This, in turn, slows transpiration to a crawl, greatly reducing the stress on the cuttings, which need time to form roots. Typically, most growers will keep their vegetativehumidity a little bit higher as well, which reduces stress.
Domes are a form of VPD control.
Most growers are concerned about the floweringcycle because that’s where the magic happens. You want to keep your VPD relatively high (low RH) during the flowering cycle. If you assume an average flowering cycle of 8 weeks, start with a moderate VPD (medium RH) during the first 3-4 weeks of your flowering cycle, then increase your VPD (lower your RH) towards the end of flowering. This reduces pathogenesis.
One thing you can do when a plant is stressed, say from moving from one room to another, is to raise the humidity. This lowers the transpirational stress and eases their transition into whatever phase or room you have set up. Additionally, HID lights can be stressful for plants, and VPD control gives you the ability to reduce their stress. If you have a dry environment and bright lights towards the top, you’ll see canopy leaves fold in like a taco. Plants do this to reduce light capture and reduce their internal temperature. If you see this happening, you need to ease up on the plants and reduce their stress.
CONCERNS WHEN USING VPD:
Pathogenesis is a big issue, which we’ve touched on briefly. The biggest drawback to running a low VPD (high RH) is that you can run into a lot of problems with pathogens if your rooms aren’t clean. As a result, many growers reduce their humidity as much as possible. Some growers brag that their humidity is as low as 20%, which is really bad for the plants and slows their growth.
Homogenizing a room’s environment is a struggle. In my experience, there are always new micro-environments forming in your room due to the nature of working with living organisms. Keeping on top of it all takes a lot of effort.
Good ventilation/circulation is necessary for VPDcontrol.
Accurate sensor readings are also a problem I keep running into. Keeping the environment at your desired setpoint of temperature and humidity can be tricky. Having the right equipment and the right room layout can make a big difference.
WHAT EQUIPMENT DO YOU NEED TO EFFECTIVELY CONTROL VPD:
You’re going to need a humidifier for starters. You want to be able to inject humidity into the room without causing any problems such as being too close to one plant. If you have your humidifiers spraying plants directly with vapor, you will end up with undesirable microclimates which could favor pathogenesis. Personally, I think that ultrasonic humidifiers work best.
You are going to need a way to measure the leaf temperatures in order to accurately calculate VPD. This is where the online charts cause many growers problems and botrytisis becomes of real concern when not taking leaf temps into account. A simple $15 Infrared Temp gun will do the job quite well.
If you’re going to manage VPD, you’ll also want a controller that integrates your humidification and dehumidification systems. You want your controllers set up in such a way that when the lights are off, the humidification setpoints for the dehumidifiers are different if possible. An RH of 10-15% lower at night is ideal but not required.
Paying attention to RH after the lights go out is a big concern. As temperature drop the RH increases (ergo relative humidity) Slowing the temperature drop will aid in the dehumidifiers ability to keep the humidity in range. I would recommend checking humidity from 20-40 mins after lights out to ensure RH is not spiking.
Temperature are also important to control using a temp controller that controls both heating and cooling is ideal. This could be done by controlling fans, heaters, ac etc.
If you don't have all the fancy stuff listed you can still use VPD to to make adjustments to your setup that will improve the VPD for your stage of growth.
It’s important to note that plants are their own internal humidifiers, depending on how many plants are in a room and what stage of growth they’re at. Small plants have less surface area and transpire less. Small plants in a big room will require humidifiers to keep the humidity up, whereas plants at full size don’t need as much humidity injection because they’re already transpiring at an increased rate. When you hit the final stages of growth, you may have to run dehumidifiers to take water vapor out.
Realize that at this level you are doing some serious high performance fine-tuning of your gardening operation. You could be adding a few percent to the final weight of your yield, but it’s going to take some work and you are going to need the proper equipment to measure and control your garden at this level.
The fan system is required because we know botrytis and other fungi are always waiting to pounce. Botrytis establishes itself best between 50 and 70°F, in still air having humidity above 55%RH. We especially want to avoid condensation; this means watch out for uncontrolled temperature drops between daytime and night.
Stay away from pre-generated charts. You must take leaf temperature into account to accurately calculate your VPD. Here is a link to a VPD calculator and don’t forget a infrared temperature gun to take leaf temperature. If you do not have one you can loosely base the leaf temperature based on your light source. LED approx. 4f cooler, HID approx 2f cooler.
www.dimluxlighting.com
VPD stands for Vapor Pressure Deficit. All gases have vapor pressures, but when we’re growing, we’re interested in water vapor. Vapor pressure deficit is the difference between the pressure of water vapor in 100% saturated air at a given temperature (basically a leaf’s vapor pressure) and the air’s actual vapor pressure. A high VPD value raises a plant’s transpiration rate and increases nutrient movement through the the plant’s xylem, while a low VPD value slows the movement of nutrients through the plant.
WHY SHOULD WE CARE:
VPD control is related to the following:
- Increasing or decreasing metabolic rate
- Improvement in yield quality
- Determining plant stresses
- Pathogenesis (more on this later)
- Carbon dioxide injection (more on this later)
You reach expert growing level when you learn to manage humidity and VPD. Everybody spends their time managing temperature, nutrients, and whatever else, but the last little thing you learn to manage is humidity, and it is significantly more finicky.
HOW TO STEER PLANT GROWTH:
In order to stay on the same page, I should point out that relative humidity (RH) andVPD are inversely related. This means that when relative humidity (RH) is high, VPD is low, and vice versa.
When growers want to know how to steer plant growth, they are interested in maximizing growth. So let’s start with how the plants react to changes in VPD:
- The bulk flow of water changes within a plant’s xylem as VPDchanges.
- If you have a high VPD, meaning that the RH is low, the plant will increase its transpiration rate and start pulling water faster from the substratein an effort to stay cool and moist.
- If the VPD is too high, the plant will become stressed, leading to inefficiencies.
- In the same vein, if the VPD is too low, meaning that the RH is high, the transpiration rate will decrease, slowing the flow of water through the plant.
- If you have a high VPD, meaning that the RH is low, the plant will increase its transpiration rate and start pulling water faster from the substratein an effort to stay cool and moist.
- Nutrients follow the flow of water through the xylem and into its various tissues. Nutrientslike calcium primarily move with the bulk flow of water through the arteries of the plant.
- If you’re injecting carbon dioxide, you want the plants’ stomata to stay dilated for as long as possible. Ideally, the stomata would be fully dilated at all times to maximize carbon dioxide use. Plants open and close their stomatato regulate moisture loss.
- If you have a high VPD, or low RH, your plants are going to close their stomatato reduce water loss. When the stomataclose, you’re not getting adequate gas exchange, and you’re not making the most of your carbon dioxide.
- If you have a low VPD, or high RH, plants will open their stomata and let in more carbon dioxide.
Effective VPD control is about balancing gas exchange. There is a “Goldilocks” zone where the plant is getting everything.
If your VPD is too low, then your plants aren’t going to acquire enough nutrients, slowing growth; if your VPD is too high, you’re going to stress the plant and the stomata will close, rendering your extra carbon dioxide ineffective. Like everything else with growing, there’s a Goldilocks zone. One VPD is too high, one VPD is too low, and one VPD is just right.
VPD IN DIFFERNT STAGES OF GROWTH:
Ideal KPA (kilopascals) ranges for different stages of growth.
| Seedling/clone 0.4-0.8 Veg 0.8-1.1 Early flower 1-1.4 Late flower 1.3-1.5 |
Domes are a form of VPD control.
Most growers are concerned about the floweringcycle because that’s where the magic happens. You want to keep your VPD relatively high (low RH) during the flowering cycle. If you assume an average flowering cycle of 8 weeks, start with a moderate VPD (medium RH) during the first 3-4 weeks of your flowering cycle, then increase your VPD (lower your RH) towards the end of flowering. This reduces pathogenesis.
One thing you can do when a plant is stressed, say from moving from one room to another, is to raise the humidity. This lowers the transpirational stress and eases their transition into whatever phase or room you have set up. Additionally, HID lights can be stressful for plants, and VPD control gives you the ability to reduce their stress. If you have a dry environment and bright lights towards the top, you’ll see canopy leaves fold in like a taco. Plants do this to reduce light capture and reduce their internal temperature. If you see this happening, you need to ease up on the plants and reduce their stress.
CONCERNS WHEN USING VPD:
Pathogenesis is a big issue, which we’ve touched on briefly. The biggest drawback to running a low VPD (high RH) is that you can run into a lot of problems with pathogens if your rooms aren’t clean. As a result, many growers reduce their humidity as much as possible. Some growers brag that their humidity is as low as 20%, which is really bad for the plants and slows their growth.
Homogenizing a room’s environment is a struggle. In my experience, there are always new micro-environments forming in your room due to the nature of working with living organisms. Keeping on top of it all takes a lot of effort.
Good ventilation/circulation is necessary for VPDcontrol.
Accurate sensor readings are also a problem I keep running into. Keeping the environment at your desired setpoint of temperature and humidity can be tricky. Having the right equipment and the right room layout can make a big difference.
WHAT EQUIPMENT DO YOU NEED TO EFFECTIVELY CONTROL VPD:
You’re going to need a humidifier for starters. You want to be able to inject humidity into the room without causing any problems such as being too close to one plant. If you have your humidifiers spraying plants directly with vapor, you will end up with undesirable microclimates which could favor pathogenesis. Personally, I think that ultrasonic humidifiers work best.
You are going to need a way to measure the leaf temperatures in order to accurately calculate VPD. This is where the online charts cause many growers problems and botrytisis becomes of real concern when not taking leaf temps into account. A simple $15 Infrared Temp gun will do the job quite well.
If you’re going to manage VPD, you’ll also want a controller that integrates your humidification and dehumidification systems. You want your controllers set up in such a way that when the lights are off, the humidification setpoints for the dehumidifiers are different if possible. An RH of 10-15% lower at night is ideal but not required.
Paying attention to RH after the lights go out is a big concern. As temperature drop the RH increases (ergo relative humidity) Slowing the temperature drop will aid in the dehumidifiers ability to keep the humidity in range. I would recommend checking humidity from 20-40 mins after lights out to ensure RH is not spiking.
Temperature are also important to control using a temp controller that controls both heating and cooling is ideal. This could be done by controlling fans, heaters, ac etc.
If you don't have all the fancy stuff listed you can still use VPD to to make adjustments to your setup that will improve the VPD for your stage of growth.
It’s important to note that plants are their own internal humidifiers, depending on how many plants are in a room and what stage of growth they’re at. Small plants have less surface area and transpire less. Small plants in a big room will require humidifiers to keep the humidity up, whereas plants at full size don’t need as much humidity injection because they’re already transpiring at an increased rate. When you hit the final stages of growth, you may have to run dehumidifiers to take water vapor out.
Realize that at this level you are doing some serious high performance fine-tuning of your gardening operation. You could be adding a few percent to the final weight of your yield, but it’s going to take some work and you are going to need the proper equipment to measure and control your garden at this level.
The fan system is required because we know botrytis and other fungi are always waiting to pounce. Botrytis establishes itself best between 50 and 70°F, in still air having humidity above 55%RH. We especially want to avoid condensation; this means watch out for uncontrolled temperature drops between daytime and night.
Stay away from pre-generated charts. You must take leaf temperature into account to accurately calculate your VPD. Here is a link to a VPD calculator and don’t forget a infrared temperature gun to take leaf temperature. If you do not have one you can loosely base the leaf temperature based on your light source. LED approx. 4f cooler, HID approx 2f cooler.
Vapor Pressure Deficit VPD Calculator - Dimlux Lighting - The Best Grow Lights
Vapor Pressure DeficitCalculator Calculate both Room VPD and Leaf VPD automatically Just enter the value below to generate the VPD values for your room and your plants. You’ll need to know the room’s temperature, relative humidity, and the plant’s temperature. We recommend calibrating your...
www.dimluxlighting.com
