Next time I go I'm taking pics. I'll probably go a little more often than I thought because even though it's in North Austin and that's pretty much South Oklahoma to me, there's a Costco and my new favorite burrito spot is nearby so it's worth the drive.
They had an overwhelming amount of stuff that was sensory overload like a tech convention so I looked up and saw signs for the sections. I saw the 3D printer sign and got laser focus on it but my adhd did kick in and got distracted by the computer bar and giant robot arm walking toward that section lol. Now that I think about it, there may have been a snack bar area near the front?
I'll go ahead and do a factory reset so that will make it very ez for me too. When you power it up the first thing will probably be asking language.
One reason I got the P2 was so I could still use all my new supply of hotends and build plates so you'll need those too.
I'm a TPU freak so I go thru a lot of those often but really dude with the A1, a texture plate and running just pla and petg, will probably run without issue for a very long time only needing to lube the rails when it says to. But yeah, TPU wears those parts out, especially cheaper and more rubbery stuff. Always do the cold pull thing to save your hotends.
The dryers can be just that but can also be a ton more like the AMS.
The newer 2025 AMS that's being copied by everybody in 2026 have taken them to another level.
I'm sending you the lite and yes you can have all 4 spools loaded while only needing one.
You pick which color you want the print to be made in and if it's multicolor then you add filament to the project and click paint
View attachment 138070
The HT and Pros with the covers add the drying feature. You can still use the external spool with any of these so if you have an oddball or risky unknown spool like the scented, use the external instead of AMS.
Your filament is never really loaded to the hot end with these. You load the AMS, insert the filament, then the motors take over and spin it and load it to the tool head when the computer tells it to.
You can control everything from drying to syncing what you load to the slicer in the studio. The "Device" on the toolbar is where you take control of the printer and can also watch the camera.
All Bambu filaments and some brands Bambu recognizes have little barcodes inside the spool. When the spool is loaded and the motors take over, it reads the barcode and sets the temp and everything automatically. If it can't read the barcode or if there isn't one then you still enter that stuff manual in the Bambu studio.
I'm not sure if it's because of the bar code or type of filament but not all TPU can be ran in a AMS so if you wanted multicolor TPU you would buy TPU for AMS direct from Bambu.
It is a different and far more durable TPU than anything out there but not many colors to choose.
However, the off brand TPU can still be ran in the AMS HT because it has backdoor for the filament to bypass the motor so it just becomes a spool holder with a drying feature. I do this because drying TPU or really preheating it cleans up the print lines making it look like a more solid object.
I got my hub upgrade in yesterday and did my first print. Gonna go ahead and install a TPU assist thing too so that was another $50 into this rig. Last thing will be the exhaust kit but I may 3D print that and just use left over grow fans. I've gone deep end on it but damn it's a helluva printer
View attachment 138071
First print is a hands free pole mount caddy for the Bluelab multimeter
View attachment 138072
View attachment 138074
View attachment 138073
I find all my hobbies tend to starts blending together for some reason.
My grow is starting to look like a 3D printed grow with the table. If I road bikes like you, it would probably be to an outdoor grow in the woods

RC cars is another for me I wish I had a lot more time for it but glad I don't because I spend enough on it.
I have a fat tire ebike I wanna get back on. That post you made about chain wax blew my mind man.
My problem is living in a city always under construction is all the shit in the roads that ends up in bike lanes. Seemed like once a week I was getting flats
That's cool AF man! I bet you can call aliens with that thing like Close Encounter