The Psyche Gardens

[Observer]

I think I had the pump unplugged for 2+ hours during the 4 hours Lights off.

But...

More root development.

pH was around 6

Need to recalibrate my E.C pen, it's showing 0 when I think it should be showing around 20-100, regardless i dont think they are very accurate right now but no calibration solution so fuck it for now I guess. (And pH pen)


Also the e.c pen is not weather proof, atleast this one isn't, or seal is worn.

It freaked out when I dropped it past the screws, had taken apart and let it dry out before.

 

[steamroller]

I have never calibrated my pH tester.

After having over 80 aquariums I would never ever buy a pH pen again.

 

[Observer]

I have never calibrated my pH tester.
View attachment 94574
After having over 80 aquariums I would never ever buy a pH pen again.

Duality of Man lol

I got so tired of fucking with test strips, but now I'm tired of fucking with these pens lol, I like the digital readout.

I should get some of those again

Thanks.

 

[Observer]

.

 

[Observer]

This has been working kinda well so far....don't really need to do anything now just let em grow lol

Just keep the gallon resevoir solution topped up and right

I'm using very little water now.

 

[Observer]

(R) Pinched tap root is moving a little faster.


And the bamboo.

 

[Observer]

I have never calibrated my pH tester.
View attachment 94574
After having over 80 aquariums I would never ever buy a pH pen again.

I'd like to get back into the aquarium hobby too once I get back on my feet.

(Not that I was ever really into it, since young and starting out)

dad had one growing up

I had a ball python though.

But would like to dabble in multiple.

 

[Observer]

18 minutes off, 4s on.

My irrigation solution is like 80f cause the closet but I'm not seeing any issues either, yet.

I have very minute dosage of 3% h2o2 as well

 

[Observer]

Thanks for checking my little grow

Update next time

I'll try to consolidate more

I'm adhd as fuck

As zen said I type one sentence post too much lol

All over the place

 

[Aqua Man]

18 minutes off, 4s on.

My irrigation solution is like 80f cause the closet but I'm not seeing any issues either, yet.

I have very minute dosage of 3% h2o2 as well

Nothing wrong with 80f for aero or fog brother.

Just check plant temps they will likely be around 76 in this case… which is perfect

 

[steamroller]

I'd like to get back into the aquarium hobby too once I get back on my feet.

(Not that I was ever really into it) I had a ball python

But would like to dabble in multiple.

There used to be a really cool fish club your way.
Not sure but think it still exists.
HAAS

KCFishClub – The Heart of America Aquarium Society of Kansas City

kcfishclub.org

One of the color variants I bred came from a gentleman named Craig who was a member.

 

[Observer]

.

20 minutes off/4 seconds on.

 

[Observer]

I think I can go longer,

Increasing to 22 minutes off from 20m, still 4 seconds.


There seems to be enough moisture between cycles where the the roots are not drying out, and RH in the tote showed 93% after placing the sensor in there for a minute, which I suspect is high enough for the roots as well.

And I suspect it'll be more beneficial, if they don't need the water, they don't need it.

Trying to encourage root growth as much as possible.

Also considering the environment is mostly stable around 80f and 60-70rh

I'm looking for the fuzzy roots, which aren't apparent yet, so I wonder if by reducing the water usage, maybe I'll see em.

Unless droplet size isn't small enough? Not sure yet....time till well.

 

[Zen_seeker]

(R) Pinched tap root is moving a little faster.


And the bamboo.

My daughter left her bamboo when she moved out the first time. I ended up looking after it. My mom had gotten it for her years earlier.

After a few years in BC, then Alberta, she moved back home for a year before moving to Quebec. This time she took the bamboo plant with her. Last I heard it had grown quite large. It’s about 15+ years old now.

 

[Zen_seeker]

Thanks for checking my little grow

Update next time

I'll try to consolidate more

I'm adhd as fuck

As zen said I type one sentence post too much lol

All over the place

I’m the opposite. I’m slow to post because I put my thoughts down first, then go back and add/remove things, and correct spelling when the phone lets me.

 

[Observer]

I think I can go longer,

Increasing to 22 minutes off from 20m, still 4 seconds.


There seems to be enough moisture between cycles where the the roots are not drying out, and RH in the tote

I think I can go longer,

Increasing to 22 minutes off from 20m, still 4 seconds.


There seems to be enough moisture between cycles where the the roots are not drying out, and RH in the tote showed 93% after placing the sensor in there for a minute, which I suspect is high enough for the roots as well.

And I suspect it'll be more beneficial, if they don't need the water, they don't need it.

Trying to encourage root growth as much as possible.

Also considering the environment is mostly stable around 80f and 60-70rh

I'm looking for the fuzzy roots, which aren't apparent yet, so I wonder if by reducing the water usage, maybe I'll see em.

Unless droplet size isn't small enough? Not sure yet....time till well.

Those fine root hairs don't fuck around.

Not sure exactly why those top ones have burnt tips

I don't think it got that dry...but maybe it did, unless chemical burn but doubtful as the rest aren't, and careful dosing.

We learnin'

 

[steamroller]

Could light be making it to them?
I see the top of the cup is empty and allows light in and moisture out.
Maybe just a cover of some sort over top of cup?

 

[Observer]

Could light be making it to them?
I see the top of the cup is empty and allows light in and moisture out.
Maybe just a cover of some sort over top of cup?

Yea good point

Might need to cover/seal that up more, and that should help.

 

[Observer]

That's a little better......

Wait till get my hands on a 3D printer lol.

That'll help the root structure too.

 

[Zen_seeker]

Do you just squish the tap root or actually pinch it off?

I tried something different with one of my current plants. The seedling root was longer than the 3D printed pot so I tried looping it back up. I’ve lightly coiled them in the past but couldn’t with this pot. I wasn’t sure how it would do but it took off.

This is it now in a one gallon.

One test doesn’t mean much but I know if I need to I can do it again. It was topped once about a week or two ago.

 

[Observer]

Do you just squish the tap root or actually pinch it off?

I tried something different with one of my current plants. The seedling root was longer than the 3D printed pot so I tried looping it back up. I’ve lightly coiled them in the past but couldn’t with this pot. I wasn’t sure how it would do but it took off.

This is it now in a one gallon. View attachment 94819

One test doesn’t mean much but I knortv=w if I need to I can do it again. It was topped once about a week or two ago.

Yeah just cut it off, or pinch it, break it.

And you can keep doing it/training and trimming the root zone is fine.

As long as the main root isn't messed with or too much at once.

Not the first time I tested pinching or cutting the end of the taproot, to see it branch out.

 

[Observer]

I got some!


I was testing a different theory/hypothesis over night

I was doing it wrong




@ 3 seconds on, 7 minutes off, now I'll tune around this time

 

[Observer]

I could recycle this water and have less waste, but I'd prefer to run it through a UV sterilizer first.

And then just recycle it.

 

[Aqua Man]

I could recycle this water and have less waste, but I'd prefer to run it through a UV sterilizer first.

And then just recycle it.

Just watch the dwell time under UV. If i remember correctly UV can cause iron to fall out of the solution

 

[ninjadip]

Yeah just cut it off, or pinch it, break it.

And you can keep doing it/training and trimming the root zone is fine.

As long as the main root isn't messed with or too much at once.

Not the first time I tested pinching or cutting the end of the taproot, to see it branch out.

I should have mentioned, I groomed the roots on that one I sent that pic of. Maybe that contributed how big they got for sure

 

[Observer]

Do you just squish the tap root or actually pinch it off?

I tried something different with one of my current plants. The seedling root was longer than the 3D printed pot so I tried looping it back up. I’ve lightly coiled them in the past but couldn’t with this pot. I wasn’t sure how it would do but it took off.

This is it now in a one gallon. View attachment 94819

One test doesn’t mean much but I know if I need to I can do it again. It was topped once about a week or two ago.

And hell yea, even in soil with limited space or in tents don't need more than 3 gallons really.