What's new

Zen Garden 2025

Pipecarver said:
I roll then pull a bit from the end and stick my rolled up filters in. I fold my filters in halfView attachment 112450View attachment 112451View attachment 112452View attachment 112453
Click to expand...
We did that. Made strips from anything like match books or cigarette packs. We rolled them up first then stuck them in. Didn’t start doing that until about 2000.

Tried the booklets of filters too. They are a fold then roll style. Son got tired of rolling joints and just used a bong daily now. 🤣
 
Pipecarver said:
Wow nice big bud on her, looks heavy too. Nice job!
Click to expand...
Both plants are doing about the same, ones just a few inches taller. It’s my first autos grow so I have no expectations or experience with them. They are firm hard buds and real sticky. G$ made them last year I think. I’m the first to grow them iirc.
 
20250831: GDP Autos Day 88

Both days and nights have been cooler and nice breeze. The one plant still has purple coming in while the other is mostly green still. Both are sticky and stinky. Heavy, musky skunky, not even close to sweet or flowery.

These are no flash then flash of the same cola.

Bigger plant
IMG_6125.jpeg
IMG_6127.jpeg

Smaller plant
IMG_6126.jpeg
IMG_6128.jpeg

Got to scope them. 👀
 
Made the Jadam sulphur today. Nice and windy out so well ventilated.

Used the reduced measurements to make about 2 litres of the liquid sulphur.
IMG_6122.jpegIMG_6123.jpegIMG_6124.jpeg

Was cool to watch it bubbling and see steam coming out.

Edit: A few days later. Has sediment I’ll filter before storing for next year. IMG_6134.jpeg
 
Last edited:
We did some testing over the weekend. Seems we like the taste of the classic papers better than the organic. Organic are whiter but have a nasty aftertaste. Not always but often. Classic don’t seem to get it.

IMG_6102.jpegIMG_6103.jpegIMG_6105.jpeg

I’ll update if things change.
 
20250901: GDP Autos Day 89

WPM 🤦

Between Friday and Sunday the smaller one got WPM starting in two spots. Main cola and side one. I cut it all off and chopped the plant. It’s hanging in one room awaiting final inspection after it dries. IMG_6136.jpegIMG_6135.jpeg
IMG_6152.jpegIMG_6153.jpeg

Taking the hint i chopped the second bigger one.
IMG_6158.jpegIMG_6160.jpeg

Funny coincidence, I finished the Jadam sulphur this weekend before I found the WPM. IMG_6133.jpegIMG_6134.jpeg

Not sure if I’m supposed to have sediment left over or if my reduced measurements are the cause but every thing else seems good. I’ll filter it and put it away for next year.
 
IMG_6141.jpeg

Looks like the peonies are the WPM cause. I took the flowers long ago but left the stems as they stayed healthy and green.

Looking for a cause of the WPM I checked all the nearby plants and found that all the stems on only the peonies were covered.

Directly below the small GDP plant.

Chopped and bagged.
 
Zen_seeker said:
20250831: GDP Autos Day 88

Both days and nights have been cooler and nice breeze. The one plant still has purple coming in while the other is mostly green still. Both are sticky and stinky. Heavy, musky skunky, not even close to sweet or flowery.

These are no flash then flash of the same cola.

Bigger plant
View attachment 112616
View attachment 112617

Smaller plant
View attachment 112622
View attachment 112623

Got to scope them. 👀
Click to expand...
Shit! The sign was right there the whole time man!

Right side of the bud about half way down.
Dead leaf, bud rot from inside out 100%
 
Zen_seeker said:
20250901: GDP Autos Day 89

WPM 🤦

Between Friday and Sunday the smaller one got WPM starting in two spots. Main cola and side one. I cut it all off and chopped the plant. It’s hanging in one room awaiting final inspection after it dries. View attachment 112745View attachment 112746
View attachment 112747View attachment 112748

Taking the hint i chopped the second bigger one.
View attachment 112749View attachment 112750

Funny coincidence, I finished the Jadam sulphur this weekend before I found the WPM. View attachment 112751View attachment 112752

Not sure if I’m supposed to have sediment left over or if my reduced measurements are the cause but every thing else seems good. I’ll filter it and put it away for next year.
Click to expand...
They really did well man! Im gonna have to run some and stop giving them all away 🤣
 
20250905: GDP Autos Drying

I chopped just before the weather got worse. More rain and high humidity. Outsides been RH 87% but insides in the mid 70’s. Trying to dry at 22*c & RH 71% today.

IMG_6165.jpegIMG_6166.jpeg

No new signs of mold/mildew but the I’m trimming away leaves each time I check to try and help dry faster as well as remove possible outbreaks. Going to be a long dry at this rate.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

I’ve been looking at making my own worm farm for a few years. I originally had three large totes ready but the wife nixed that idea.

Lately I was looking again for a smaller solution my wife can live with. I saw a few indoor/outdoor setups that use small bins the size of a trim bin. Some fit on a counter top but most are for discrete corners or out of the way spots. Prices start at $120 but go as high as $180 for these base Maze models.IMG_6178.jpg

Not many 3D printable options either. But I’m thinking about printing this one.IMG_6174.jpegIMG_6175.jpeg

If needed I can make more levels.
IMG_6177.jpeg

No spigot but it’s small enough I can just dump it into a bottle manually or make a hole and add one. We’ll see…

IMG_6181.jpeg
IMG_6179.jpeg
No one local carries the Red Wigglers but a few will special order, $15 plus tax for 50 is the best I’ve found. Amazon wants $20 to $50 for the same thing. Should have looked when fishing season opened. Some bait shops carried these and night crawlers.
 
The first worm composter failed to print properly. Kept going stringy. So I chose another smaller model that’s round rather than square. Only problem is that it’s for a single bin with a separate base and lid. Further inspection has me believing that the main bin design will let stack them. I’ll start with two and see if it works. 🤞

New design.IMG_6186.jpeg

IMG_6202.jpegIMG_6203.jpeg

At 2:30am the second bin had an error at 99% and 3 minutes left. Lucky it was just an out of place spool. It was down to three loops of filament left. I fixed it and it finished but the last run is a bit bumpy rather than smooth. (Who cares, it’s a worm bin?!)
IMG_6207.jpeg

They stack! 77893535137__AA2A1579-A5A1-40A7-B8A2-E836263161D3.jpeg77893536620__C1107544-05A3-4A6D-8FE7-7C4EB1615DCD.jpeg

I’ll do the base next and then the lid. We’re out of black so I’ll use the brown petg-gf I have left over. After that I’ll do a final third bin for when things get rocking and I need more space for scraps and worms.

To be continued…
 
I'm using 2 dehues to get my flower tent down. 1 can maintain 65% but I need both going to get 50% or lower if I can. My basement stays pretty cool even with 2 dehues running. great this time of year in veg, flowering??? I'll need both going again real soonDehues.png
 
Zen_seeker said:
Worm farms done.
View attachment 113189

Feet almost slide over the base feet. 1% off as it’s just a hair off wide enough. Everything else is a perfect fit.
Click to expand...

I was able to get two out of the four feet to slide over the originals. So I grabbed a rotary tool and rounded the sides of all the feet and removed any burrs. Once all slid on with a bit of force I used a rubber mallet to seat them solid all the way on.

IMG_6236.jpeg
 
You must log in or register to reply here.
Back
Top Bottom