smoke

[steamroller]

I really should try keif. I just like smoking flower, I always seem to go there.

Does it taste like the plant it came from?

Better~!
Get some screens.

 

[smoke]

I really should try keif. I just like smoking flower, I always seem to go there.

Does it taste like the plant it came from?

Don't know. Tastes like kif

 

[smoke]

Day 71 of flower, clones have bean in the system for 22 days

 

[moe.red]

Gonna be a nice harvest.

 

[smoke]

Gonna be a nice harvest.

Thinking Saturday we'll start

 

[moe.red]

Thinking Saturday we'll start

I hope to be germing seeds Saturday. I'd rather have my job.

 

[smoke]

Arriving Thursday ,
helper needs a bucking machine

 

[Rootsruler]

Arriving Thursday ,
helper needs a bucking machine
View attachment 26979

That'll certainly do the job. Do you wet or dry trim?

 

[smoke]

That'll certainly do the job. Do you wet or dry trim?

We've used the hand crank bowl trimmer the last couple years, always wet triming and not too particular about the job it did. A couple spins and done. Everything we grow is personal or to give away

 

[Speedypete]

Arriving Thursday ,
helper needs a bucking machine
View attachment 26979

wow It will take you longer to clean up than it will to trim Cool

 

[steamroller]

Your plants are beast~!

 

[SweetLeafGrow]

So fun to watch your grow bro, excellent work and kudos to you and your bride!

 

[moe.red]

I would like to see you try " neither " while using your chiller

I've decided I am going to try this.

My fallback will be H2O2 if problems arise.

And this is the most water volume I have ever had I hope the chiller keeps up.

 

[smoke]

I've decided I am going to try this.

My fallback will be H2O2 if problems arise.

And this is the most water volume I have ever had I hope the chiller keeps up.

I don't see you having any problems, actually quite excited to see you try because I've never seen anyone even talk or attempt it in all my years

Edit; you should be good with a 1/4 hp chiller

 

[moe.red]

I don't see you having any problems, actually quite excited to see you try because I've never seen anyone even talk or attempt it in all my years

Edit; you should be good with a 1/4 hp chiller

This chiller is kinda old. And I have more than 80 gallons to chill. I'm not going to say the exact number because I'm gonna make you guess later. How many jellybeans in the jar kinda thing.

I have another chiller I can swap in if necessary. But there were times it struggled on half the water volume in the past. So I may not be a side by side for you (my temps are likely to be higher) but we will see.

I have to believe that since I live near water that the right bacteria will just float in and make my res good (copyright Cashmeh)

I have some basic bacteria stains and gram + / neg tests, but I do not believe I will be able to say conclusively what does in fact grow in there. But I still want to try. I'll grow out some agar plates and see what we got before I harvest (or add H2O2 if things go bad)

 

[SweetLeafGrow]

I have to believe that since I live near water that the right bacteria will just float in and make my res good (copyright Cashmeh)

Forgot about that guy, lol.

 

[smoke]

Play by play
Almost done #1






Edit done

 

[steamroller]

Can't believe I see a roach clip next to that pile~!
Killer haul, just plant 1 huh.

 

[smoke]

Can't believe I see a roach clip next to that pile~!
Killer haul, just plant 1 huh.

#2 is finished, lunch time

 

[steamroller]

You using the new bucker?

 

[smoke]

You using the new bucker?

Never did get her a bucker machine are using the electric trimmer

View attachment 20231028_115216.mp4

 

[GoodShit97]

Never did get her a bucker machine are using the electric trimmer
View attachment 27447
View attachment 27446

Looks great man, gonna be a really nice harvest

 

[smoke]

All done. 7 hrs to harvest the 4 plants. #1 was the smallest and #4 was the biggest.

 

[smoke]

Using a different drying room

 

[smoke]

Using the flower room as the drying room

 

[steamroller]

I dry in my room also.
Wish I had separate veg and flower rooms.
I dry for the first 3 days a little warmer at 68F 50-55%RH
I go down to 64f or lower after first 3 days.

 

[smoke]

You using the new bucker?

Before we started harvest i asked her if she wanted to try one.

now that we are done she has changed her mind for the next grow

DeBudder Edge Original 420 Brand - CLEARANCEDefault Title

The DeBudder Edge Original works great for mid-size to commercial growing operations, mount it to a wooden, plastic or metal surface securely with the provided mounting screws and begin saving time and money immediately! The DeBudder Edge has 10 mounting screws which securely holds the bucking...

www.discountedhydroponics.com

 

[steamroller]

I have one like that and one that clips on a 5g bucket.
They make life a little easier.
Anytime without scissors in hand is better.

 

[smoke]

I dry in my room also.
Wish I had separate veg and flower rooms.
I dry for the first 3 days a little warmer at 68F 50-55%RH
I go down to 64f or lower after first 3 days.

Just seamed easier to dry in the flower room this time because the 4 in veg won't be ready to flower for another 2 to 3 weeks.

 

[SSgrower]

I am following along here with Smoke and he really can Yo-Yo, I'd get lost in all them, oh, and the trellis net hanging is sweet, thanks for the views. SSgrower

 

[smoke]

Put the flower from the 4 plants into the vaults to finish the drying and start the cure. Moisture readings are from 66 % to 72%. We will burp them down daily until everything is a stable 62%. Every plant filled at least 1, 21 liter vault plus. (2 lbs+)

Cleaned up the flower room, added water and ph to 5.8. The room still had the roots and water in each module to help add humidity while drying. Roots looked good imo with no rot

 

[moe.red]

Put the flower from the 4 plants into the vaults to finish the drying and start the cure. Moisture readings are from 66 % to 72%. We will burp them down daily until everything is a stable 62%. Every plant filled at least 1, 21 liter vault plus. (2 lbs+)

Cleaned up the flower room, added water and ph to 5.8. The room still had the roots and water in each module to help add humidity while drying. Roots looked good imo with no rot

View attachment 28327View attachment 28328View attachment 28330View attachment 28335View attachment 28339View attachment 28338View attachment 28337

Beautiful finish man. You are like an ad for Current Culture.

 

[smoke]

Beautiful finish man. You are like an ad for Current Culture.

All i do is add this and that, the plant does the rest with a bit of coaxing.

 

[moe.red]

with a bit of coaxing.

Which your helper does.

 

[steamroller]

Great harvest and huge roots~!

 

[smoke]

Moved the 4 Athens Silver Haze out of the veg room to the flower room, one plant in particular was supported by yo-yo in the veg room, decided to put a cage around her to help. Roots are similar conditions of the AF1 when they were moved over. Post #61 and 62 above.

Still working on getting the AF1 stable at 62% in the vaults.

 

[moe.red]

Hey man, it's a lot to ask but do you think your helper could take a video of a walkthu on your space? I'm having trouble visualizing your rooms and layout. Are these rooms on a concrete slab?

 

[smoke]

Hey man, it's a lot to ask but do you think your helper could take a video of a walkthu on your space? I'm having trouble visualizing your rooms and layout. Are these rooms on a concrete slab?

I'll put it on her honey do list and see how that goes.

Stay tuned. Lol

 

[smoke]

Hey man, it's a lot to ask but do you think your helper could take a video of a walkthu on your space? I'm having trouble visualizing your rooms and layout. Are these rooms on a concrete slab?

Ok, rooms are built in our 40x80 shed that already had a concrete floor but no plumbing or water in the shed. The shed is split in half with partition wall. Heated with a hot dawg propane heater on the finished half. Shed is 50 ft from the house and septic tank. We added a 2 ft bump out and put all the plumbing and water for the heated bathroom in that bump out.

RO water is made in this bathroom and sent via blue pex tubing through the unheated half in the rafters to the 325 gal storage tank in the heated side where the veg and flwr rooms are built.


View attachment 20231111_090454.mp4

 

[Rootsruler]

Ok, rooms are built in our 40x80 shed that already had a concrete floor but no plumbing or water in the shed. The shed is split in half with partition wall. Heated with a hot dawg propane heater on the finished half. Shed is 50 ft from the house and septic tank. We added a 2 ft bump out and put all the plumbing and water for the heated bathroom in that bump out.

RO water is made in this bathroom and sent via blue pex tubing through the unheated half in the rafters to the 325 gal storage tank in the heated side where the veg and flwr rooms are built.

View attachment 29930View attachment 29931
View attachment 29932
View attachment 29935

Wow! You aren't messing around!!!