3D printers and the things growers and stoners can make with them

[Observer]

Thought this looked cool



And this canopy trellis.

 

[Stoneyluv]

View attachment 103095

Thought this looked cool


View attachment 103097
And this canopy trellis.

those are made with a resin printer, not a filament printer.. different beasts.. they're cool though!!!

they pull the plastic up from a liquid bath of resin, like magic!!! ...

 

[Observer]

A fogdisc under something like this, netcups above.

 

[Observer]

those are made with a resin printer, not a filament printer.. different beasts.. they're cool though!!!

they pull the plastic up from a liquid bath of resin, like magic!!! ...

Ooo

That's cool, looks a lot pricier lol

 

[Zen_seeker]

Saw a pegboard display that I can put beside the sink. Son said it will take half a spool but should be good.

He’s made a few attachments as well as a bunch of hooks.

Think he said 14hrs.

=-=-=-=-=-=-=-=-=

I found a good AMS unit that’s supposed to be better than the original. He printed everything but the two motors and a few tubes. Saved $200. He’s happy.

Now he’s got to figure out how to get it all back into the tent.
=-=-=-=-=-=-=-=-

He printed this the other day but he doesn’t like it. He has lots of magnets for his projects but the lid just seems too flimsy. He likes mine better but needs a lighter compartment.

 

[Observer]

Saw a pegboard display that I can put beside the sink. Son said it will take half a spool but should be good.View attachment 103113

He’s made a few attachments as well as a bunch of hooks.View attachment 103114

Think he said 14hrs. View attachment 103110

=-=-=-=-=-=-=-=-=

I found a good AMS unit that’s supposed to be better than the original. He printed everything but the two motors and a few tubes. Saved $200. He’s happy.View attachment 103112

Now he’s got to figure out how to get it all back into the tent.
=-=-=-=-=-=-=-=-

He printed this the other day but he doesn’t like it. He has lots of magnets for his projects but the lid just seems too flimsy. He likes mine better but needs a lighter compartment. View attachment 103115

Little bigger neodymium magnets?

 

[Zen_seeker]

Little bigger neodymium magnets?

Not enough. Needs a lip, track or twist added. Like the Lobo mouth piece.

 

[Zen_seeker]

i like the color!!!!!!!!!!!

i made a concert buddy a while back..

View attachment 103040

Son made one with magnets. Not a very tight/strong fit though. How’s yours?

 

[Stoneyluv]

Saw a pegboard display that I can put beside the sink. Son said it will take half a spool but should be good.View attachment 103113

He’s made a few attachments as well as a bunch of hooks.View attachment 103114

Think he said 14hrs. View attachment 103110

=-=-=-=-=-=-=-=-=

I found a good AMS unit that’s supposed to be better than the original. He printed everything but the two motors and a few tubes. Saved $200. He’s happy.View attachment 103112

Now he’s got to figure out how to get it all back into the tent.
=-=-=-=-=-=-=-=-

He printed this the other day but he doesn’t like it. He has lots of magnets for his projects but the lid just seems too flimsy. He likes mine better but needs a lighter compartment. View attachment 103115

i designed very similar hooks to go under my cabinet doors to hang fresh pasta from!! great minds thinkin alike..



other goofy kitchen stuff i made..

sponge holder..



under cabinet tong rack hooks...



egg sheller...

Son made one with magnets. Not a very tight/strong fit though. How’s yours?

a little too tight, water tight.. don't know how deep for diving or anything but i dunked it and shook it around under water.. the lid ain't falling off.. it takes some muscle to open it.

 

[Zen_seeker]

@Stoneyluv I’m sort of doing the same thing. But saving links more than asking that I print them, for now.

Lots of brackets and building tools. Trying to avoid just the cool ideas with no practical purpose.

I’ve never seen an egg sheller before.

Still got two hours left on the pegboard display.

A better shot of the AMS v2.0
Here are the two motors and tubes he had to buy. Most of what I print or get him to print is black.

More things I’d like to do but it will have to wait until I can mod the files and make my own.

 

[Zen_seeker]

Son was able to resize and change supports so it finally printed properly. Testing two now with good results so far.

 

[Observer]

Idea: Iris, to hold plants in netcups over aerochambers, Adjustable for sizing.

Google Image Result for https://cdn.thingiverse.com/assets/d7/b7/12/17/bb/iris_IV.gif

 

[Observer]

Treadmill modded into giant 3D printer with an endless print bed size — taking 3D print sizing to the extreme

The possibilities are now literally endless.

www.tomshardware.com

 

[Observer]

Son was able to resize and change supports so it finally printed properly. Testing two now with good results so far.

View attachment 103572View attachment 103573View attachment 103574

Take the covers off?

They just collect dust and interfere with the windflow

 

[Zen_seeker]

Take the covers off?

They just collect dust and interfere with the windflow

I’d hit one, break it, nock the pole over, tear the tent, fall back off my stool, fall into a coughing fit, have Willow on my chest wondering what game I’m playing, while my son is laughing in the doorway. I’ll just leave it on.

Seriously it’s more of an ocd thing. Looks broken off.

 

[Stoneyluv]

I’d hit one, break it, nock the pole over, tear the tent, fall back off my stool, fall into a coughing fit, have Willow on my chest wondering what game I’m playing, while my son is laughing in the doorway. I’ll just leave it on.

Seriously it’s more of an ocd thing. Looks broken off.

this made me laugh.. i'd need to print a bandaid holder next to it if i took the shrouds off!!! haha