Welcome Aboard the 4:20 Pineapple Express!

[Stoneyluv]

Hey dose these lens "need" to be on there?
View attachment 124657
Little clean up work.

i've like to know as well!!! i feel it's only purpose is to keep the board and diodes clean. a grow room is a filthy place and you don't want the inside of your lights to look like that fans!!

i've replaced all my plastic covers, they get hazy after a while and i want all the photons i can get coming through!!!

 

[Bandit420]

Hey dose these lens "need" to be on there?
View attachment 124657
Little clean up work.

I heard that if you take those out then the led turn into death ray lasers.

I'd call CLW and ask them. Panels needed lenses from what I remember but not sure. I've never taken mine apart more than removing the fan covers and blasting it with canned air

 

[Bandit420]

Ready for gameday!
Looks like we'll be Seahawk fans for the day. DJ deserves a 'ship and my wife loves those uniforms so yep, Go Hawks!!

 

[Stoneyluv]

how you liking that new piece? it looks cool.... was it expensive?

.

i'll be all in rooting for the hawks as well... it was cool when they were still in the same division as the raiders back in the day!!

 

[Bandit420]

how you liking that new piece? it looks cool.... was it expensive?

.

i'll be all in rooting for the hawks as well... it was cool when they were still in the same division as the raiders back in the day!!

Milked it up and turned on the lights just for you!



I paid $202 and most I'd pay would be around $250. Somewhere between $180 and $220 is good value IMO. Smoke Cartel Cabana Club is free to join and doing that brings it down to $202. I haven't seen it lower than that new in box.
It's closer to a torch and banger experience than other Erigs I have or tried.
I test drove one at the headshop back with that fiasco over the Pearl and ordered one online that same day but I guess this model or whatever was on backorder or some change of ownership inside Ispire or something, IDK, weird drama, but in the end I finally got this rig and found a site to order replacement parts to keep it going.
This is the Northern Lights model but it also come in black, light blue, and honey gold. I wanted the honey but it was sold out but it looked baddass. NL is cool too but could use better lights or more of them. I'm guessing you'd be into the black lol



It doesn't heat like the Peak. Uses magnets and is called induction heating. So no coil and instead is a glass cup which is the main reason I got it since that would be the best option for home squish and keeping the rig clean.
Other than the carb cap piece, all the other silicone pieces seem decorative more than functional so I took those off mine.

It will take the soul of your dab down to the molecular level. Connoisseur grade hit and experience but limited to just that topper so no deviation from that.
I like it ton and it's a welcome addition to the stable.
It's there with the Peak if not better in the heating function and all that but Peak can be changed up so much depending on topper and chamber.
And don't leave out Proxy in all this either. Proxy is all the good of peak downsized a little and adaptable into any rig out there so while the two erigs are beasts, the proxy in a double perk bong is a luxury cruise into space.
I even got my wife a new rig and since she's all into ancient Egypt and we have these crazy conversations about the ancient world and today, I set hers up with Proxy

 

[GrumpAzz]

Thinking about giving my cross a name now that I like her.
Leaning toward Warchild. After all, it is Afghani X Vietnamese

Insurgence...

 

[Stoneyluv]

Milked it up and turned on the lights just for you!

View attachment 124719

I paid $202 and most I'd pay would be around $250. Somewhere between $180 and $220 is good value IMO. Smoke Cartel Cabana Club is free to join and doing that brings it down to $202. I haven't seen it lower than that new in box.
It's closer to a torch and banger experience than other Erigs I have or tried.
I test drove one at the headshop back with that fiasco over the Pearl and ordered one online that same day but I guess this model or whatever was on backorder or some change of ownership inside Ispire or something, IDK, weird drama, but in the end I finally got this rig and found a site to order replacement parts to keep it going.
This is the Northern Lights model but it also come in black, light blue, and honey gold. I wanted the honey but it was sold out but it looked baddass. NL is cool too but could use better lights or more of them. I'm guessing you'd be into the black lol

View attachment 124726

It doesn't heat like the Peak. Uses magnets and is called induction heating. So no coil and instead is a glass cup which is the main reason I got it since that would be the best option for home squish and keeping the rig clean.
Other than the carb cap piece, all the other silicone pieces seem decorative more than functional so I took those off mine.

It will take the soul of your dab down to the molecular level. Connoisseur grade hit and experience but limited to just that topper so no deviation from that.
I like it ton and it's a welcome addition to the stable.
It's there with the Peak if not better in the heating function and all that but Peak can be changed up so much depending on topper and chamber.
And don't leave out Proxy in all this either. Proxy is all the good of peak downsized a little and adaptable into any rig out there so while the two erigs are beasts, the proxy in a double perk bong is a luxury cruise into space.
I even got my wife a new rig and since she's all into ancient Egypt and we have these crazy conversations about the ancient world and today, I set hers up with Proxy

View attachment 124720

thanks for the run down man... i didn't realize they've been around so long. there's quite a few things i like about it. glass all the way through is tops, the induction heating for longevity, replaceable 18650's (which i have lots of), pass through charging, no PITA auto shut off or complicated buttons, and did i mention that i liked that it was glass all the way through!!!!!! from dab to lips all glass!!

one question, does the topper fit in a standard size sonic cleaner?

so you would think i'd go right for the black one.. it's my style!!! fuck it man it's a brand new year, time for a change.. i just ordered the honey model!! it was a few bucks more than the black but worth it. i ended up paying $225 all said and done.. i didn't snoop around for any coupons or anything, they already offered free shipping so i paid sticker price. grasscity also had it for the same price as smoke cartel and both use the same exact same cabana club. so your cabana club login will also work at grasscity...

there's just something about honeycomb and concentrate that goes together like peanut and jelly!!! plus it was a limited run thing so they say.
really looks cool in the photos!! the black was just a little too plain jane for me, if there was maybe special black graphics on the glass or something like there is on the honey i might has gone that way. but just the plain flat fake ass looking carbon fiber (plus i'm just not a carbon fiber kinda guy) the honey has the textured honeycomb in 3D, just looks way cooler.

like ya say it's not all the flash and fluff of a puffco but i think with the right setup it could be extremely useful. and i ain't ever gonna lose that bright yellow case thats for sure!!! haha

 

[Bandit420]

thanks for the run down man... i didn't realize they've been around so long. there's quite a few things i like about it. glass all the way through is tops, the induction heating for longevity, replaceable 18650's (which i have lots of), pass through charging, no PITA auto shut off or complicated buttons, and did i mention that i liked that it was glass all the way through!!!!!! from dab to lips all glass!!

one question, does the topper fit in a standard size sonic cleaner?

so you would think i'd go right for the black one.. it's my style!!! fuck it man it's a brand new year, time for a change.. i just ordered the honey model!! it was a few bucks more than the black but worth it. i ended up paying $225 all said and done.. i didn't snoop around for any coupons or anything, they already offered free shipping so i paid sticker price. grasscity also had it for the same price as smoke cartel and both use the same exact same cabana club. so your cabana club login will also work at grasscity...

there's just something about honeycomb and concentrate that goes together like peanut and jelly!!! plus it was a limited run thing so they say.
really looks cool in the photos!! the black was just a little too plain jane for me, if there was maybe special black graphics on the glass or something like there is on the honey i might has gone that way. but just the plain flat fake ass looking carbon fiber (plus i'm just not a carbon fiber kinda guy) the honey has the textured honeycomb in 3D, just looks way cooler.

like ya say it's not all the flash and fluff of a puffco but i think with the right setup it could be extremely useful. and i ain't ever gonna lose that bright yellow case thats for sure!!! haha

Lucky dog grabbing up the Honey!!!! That might be the best honeycomb rendition into a rig ever that's still affordable. Some are okay, some are straight up bad but that one is clean and wicked mean all at the same time!!!
The NL is very cool and trippy but yeah that honey comb is chef's kiss cool. I've been wanting a honey theme topper for my peak too.

You'll probably be getting the V2 which is why mine took so long. I ordered in between the stock of V1 and V2.
The V2 will not come with the inner cup so there will be two blank spots in your case and it will look like it's missing the two inner cups for the V1. The two cup was sort of a redundant design and caused splashes so the reclaim cup is pretty much a 2 in 1 design now.

You're spot on about control. Peak is like the fully loaded tech package in a new car while this dude is a stick shift and you can pop the clutch and burn the tires.
I operate between 420 and maybe 550 max. 600 gets a bad flavor in the wax I get and IDK how people go to 710 and like it. Much lower for home squish starting at 400 and maybe going to 520.
Cold start hit on low temp is great and heat time is speedy enough for me to be happy about it.
No overheating warnings or anything yet...I don't think it has all that stuff anyways.
There's lights but nothing very cool, just lights and it beeps when it's up to temp.
I like the 2in1 cup now that I think about it because I really don't want any reclaim from this rig. It does a fine job getting everything out so let the swab have the rest, fuck reclaim. I don't even save that stuff from my proxy anymore. Just not a reclaim guy. It's like the roaches of dabbing for me lol.

Dirties up fast man. Topper will need a bathtub about 4.5"x5" or can be plugged and soaked.
Yep, nuthin but glass! The banger is built into the topper and the cup is deep AF. The metal in the bottom is what heats the glass. Cup is nice and deep too so nothing is escaping that well!
Messing with it, I guess the silicone between banger and cup does provide some resistance so taking mine off allows more air thru there. Keeping it on would make sure air can only come thru the carb cap. With or without, smoke stays contained in the banger and topper but with the silicone is a slightly more intense hit.

Mine has that carbon fiber look but I have some galaxy vinyl wrap I'll use to give it a night sky look more in tune with a northern lights theme and maybe a transparent TPU wrap around the bottom of the topper to enhance the light, give it more glow.




IDK about battery life yet since I rotate devices thru the night but seems this mutha would put me into the dirt before it's battery runs dead.
It just hits hard man but also burns thru wax a little faster than puffco too. It's high octane if you want it!!

My pelican case will be repurposed for something else. Still can't believe it came in that lol. This rig stays in my globe or on the bar so no need for the case. I'm guessing it will be for RC car stuff lol.
Oh another cool thing...The instructions come printed on a mousepad. I needed a mousepad so win win!!!

 

[Bandit420]

BTW here's the link to spare parts. Discount code for 15% off is CLOUDCOMEBACK

Ispire Parts & Accessories - To The Cloud

Need parts or accessories for your Ispire Daab or Wand, To the Cloud Vapor Store has you covered from wand flower cups to Daab reclaim cups. Shop Ispire Parts at To the Cloud Vapor Store.

www.tothecloudvaporstore.com

 

[Stoneyluv]

Lucky dog grabbing up the Honey!!!! That might be the best honeycomb rendition into a rig ever that's still affordable. Some are okay, some are straight up bad but that one is clean and wicked mean all at the same time!!!
The NL is very cool and trippy but yeah that honey comb is chef's kiss cool. I've been wanting a honey theme topper for my peak too.

You'll probably be getting the V2 which is why mine took so long. I ordered in between the stock of V1 and V2.
The V2 will not come with the inner cup so there will be two blank spots in your case and it will look like it's missing the two inner cups for the V1. The two cup was sort of a redundant design and caused splashes so the reclaim cup is pretty much a 2 in 1 design now.

You're spot on about control. Peak is like the fully loaded tech package in a new car while this dude is a stick shift and you can pop the clutch and burn the tires.
I operate between 420 and maybe 550 max. 600 gets a bad flavor in the wax I get and IDK how people go to 710 and like it. Much lower for home squish starting at 400 and maybe going to 520.
Cold start hit on low temp is great and heat time is speedy enough for me to be happy about it.
No overheating warnings or anything yet...I don't think it has all that stuff anyways.
There's lights but nothing very cool, just lights and it beeps when it's up to temp.
I like the 2in1 cup now that I think about it because I really don't want any reclaim from this rig. It does a fine job getting everything out so let the swab have the rest, fuck reclaim. I don't even save that stuff from my proxy anymore. Just not a reclaim guy. It's like the roaches of dabbing for me lol.

Dirties up fast man. Topper will need a bathtub about 4.5"x5" or can be plugged and soaked.
Yep, nuthin but glass! The banger is built into the topper and the cup is deep AF. The metal in the bottom is what heats the glass. Cup is nice and deep too so nothing is escaping that well!
Messing with it, I guess the silicone between banger and cup does provide some resistance so taking mine off allows more air thru there. Keeping it on would make sure air can only come thru the carb cap. With or without, smoke stays contained in the banger and topper but with the silicone is a slightly more intense hit.

Mine has that carbon fiber look but I have some galaxy vinyl wrap I'll use to give it a night sky look more in tune with a northern lights theme and maybe a transparent TPU wrap around the bottom of the topper to enhance the light, give it more glow.

View attachment 124820


IDK about battery life yet since I rotate devices thru the night but seems this mutha would put me into the dirt before it's battery runs dead.
It just hits hard man but also burns thru wax a little faster than puffco too. It's high octane if you want it!!

My pelican case will be repurposed for something else. Still can't believe it came in that lol. This rig stays in my globe or on the bar so no need for the case. I'm guessing it will be for RC car stuff lol.
Oh another cool thing...The instructions come printed on a mousepad. I needed a mousepad so win win!!!

View attachment 124821

so i had it in my cart and was just snooping at pics and vids as a last second yay or nay on it and when i saw the special print mousepad that came with the honey i was all in like a fat kid on a cupcake!!!!

from what i read your norther lights edition is the only one with lighting. all the other models are just red for no chamber and blinking and steady orange for fire.. but man i wish puffco had different lighting for heat up to rip like this ispire! i always wished just the emblem would light up during heat up and then the whole topper once it's ready.. when the pros first came out there was a third party software you could put on it and almost make that happen. the guy that made it stopped doing updates though and ya can't use it anymore! sucks too because he unlocked the ready mode and could use it with any wireless charger not just the puffco brand.

i had to go back to puffco software once he stopped updating... haven't looked in a long time if anyone else is coding them now.

but i bought this for the same reason as you, for the squish man!!!!!

and reclaim.. well thats a pet peeve of mine, if someone gets reclaim from their dabber then their doing it wrong. their eyes are bigger than their lungs is what it is. if i get reclaim it means i put too much in from the start!!!! no reason to even have left over in my opinion!! only put in what you can inhale and stuff stays cleaner!!!

sure a tiny bit goes into the swab but man if you can't reuse a swab two or three dabs then it's wasting too much.

BTW here's the link to spare parts. Discount code for 15% off is CLOUDCOMEBACK

Ispire Parts & Accessories - To The Cloud

Need parts or accessories for your Ispire Daab or Wand, To the Cloud Vapor Store has you covered from wand flower cups to Daab reclaim cups. Shop Ispire Parts at To the Cloud Vapor Store.

www.tothecloudvaporstore.com

very cool, thanks!!! that explains why i couldn't find those little replacement cups. they're not even used anymore. also explains the poor reviews i saw out there about those reclaim cups leaking air.

i always like having at least one extra cup on hand for cleaning downtime but having both rigs now it might not even be an issue.

.

funny how we think alike though, that case would be awesome for RC!!!!! first thing i thought of as well!! crawling courses are hostile walking terrane most of time and having a tough case that is easy to see in the woods is awesome to have!! i could keep my weed safe in it!!!! hahahaha

 

[steamroller]

Y'all better be watching wheel of fortune for your points~!