Stoney's Luv Shack

some kind of kush, i forget what he said.. i texted him a bit ago to than him again and ask the strain. he doesn't get involved with the extract side. he takes care of reading numbers for the plants and just keeps a general eye on them,,, he's not into the sugar, he pokes fun at my pot snobbiness.. his name is Vlad, and i call him vlad the inhaler!!! :ROFLMAO:
 
yeah i can send both entries to her like last year ez pz!! you can email her your sheet now whenever you want, she likes them early. i need to win at least a 3rd place so the next couple are covered!!

and yes sir i do in fact use the magnets to hold the top paper... i always used my finger till i saw NS, went out to my fridge grabbed a magnet and never looked back!!! since then though i did print a few shapes out for fun!!

ahhh that jar!!! wait till ya hear this one... i got a text yesterday early afternoon from a friend, i don't get to see him much any more but we used to R/C crawl a lot.. well he's been working up in maine at some huge grow facility that his aunt owns and runs. he stays up there for months at a time and only comes back home for a few weeks and then back up there in maine. well this place does in house extracts and he stopped in on his way home from there and left me that jar...

no joke bro...

View attachment 40109

That's just an insane amount of goodness!🥰

Good to hear on the magnets because I think you might like this one I'm sending to you.

IMG_6344.JPG

I'm able to pretty much duplicate the NS magnets now. Down to the type and size of magnet they use and even copied the octagon shaft. They're near identical in every way but I use TPU.
I can make six for the price they charge for one and I can customize, personalize, and pretty much go nuts with it.

And yeah I know my #5 aint perfect but I couldn't find a download of it anywhere and that is one funky font! I got close though!
If you want to work with it, here it is but fair warning...do not ungroup it! Well you can just to see how nuts that design was to make. Absolute chaos with shapes and cuts

 
That's just an insane amount of goodness!🥰

Good to hear on the magnets because I think you might like this one I'm sending to you.

View attachment 40131

I'm able to pretty much duplicate the NS magnets now. Down to the type and size of magnet they use and even copied the octagon shaft. They're near identical in every way but I use TPU.
I can make six for the price they charge for one and I can customize, personalize, and pretty much go nuts with it.

And yeah I know my #5 aint perfect but I couldn't find a download of it anywhere and that is one funky font! I got close though!
If you want to work with it, here it is but fair warning...do not ungroup it! Well you can just to see how nuts that design was to make. Absolute chaos with shapes and cuts


thats fuckin awesome!!!!!!!!!!! i tried to make a 5 once,,, i know exactly what you mean!!!! it was to much for me. i never thought of making them in tpu, very cool!!!

speaking of 3d prints. can i have your files on the xl vg? you mentioned a better working non hinged version.. maybe?
 
thats fuckin awesome!!!!!!!!!!! i tried to make a 5 once,,, i know exactly what you mean!!!! it was to much for me. i never thought of making them in tpu, very cool!!!

speaking of 3d prints. can i have your files on the xl vg? you mentioned a better working non hinged version.. maybe?

I coulda swore I made these public. Looks like I only made one piece public in some sort of stoner move but here ya go...

Front cover. I haven't done it but after using this design the only thing I'd change is to add some lip like rails to the inside outer edge to prevent the wave from sliding off which did happen to me and got some sprouts mixed up


Back part with heat


This is the S wall I'm using and it doesn't have a hinge on it for xtra capacity


The pin to use on the hinges will be a 3mm diameter shaft. Print it by itself for best results or use a stainless steel rod. You can also close up those holes then resize for something like a kbob skewer or something like that but those existing holes are 3mm
 
I coulda swore I made these public. Looks like I only made one piece public in some sort of stoner move but here ya go...

Front cover. I haven't done it but after using this design the only thing I'd change is to add some lip like rails to the inside outer edge to prevent the wave from sliding off which did happen to me and got some sprouts mixed up


Back part with heat


This is the S wall I'm using and it doesn't have a hinge on it for xtra capacity


The pin to use on the hinges will be a 3mm diameter shaft. Print it by itself for best results or use a stainless steel rod. You can also close up those holes then resize for something like a kbob skewer or something like that but those existing holes are 3mm

sweet thanks bro!! 🩲

looks like all i need to print out is the new wavy part. i already printed that base and cover unless you changed the sizes :oops:

either way i wanted one that fit at least fifteen beans!!!

and yes, i need to find a new pin, i printed the pin horizontal and it left the printer ridges on it and makes the VG has the most eerie coffin sound!!!


View attachment 013.MOV

👻👻
 
Dude, ya just cant get a good pair of warm gloves these days!
Im still looking for a pair that compares to my old snowmobile gloves.

i was sooo tempted to say fuck the gloves and buy mittens.. my hands stay warm, it's always my fingers that get cold.
 
Agreed, but mittens are fkn useless man! 😒
But so are cold fingers so idk 🤣

yeah, you're right mitten are a pita big time!! maybe look into the new electric gloves??? the tesla of handwear.. don't think i could ever do that. i would make fun of somebody doing that so can't do it myself!! :ROFLMAO:

and btw, i'm not mean when i make fun of people.. laughing at ones misfortunes is what makes the world go round!!!! :ROFLMAO:

^^^ that should be a bumper sticker!!!!!

I thought the gloves were my appropriate fist bump yet.
Hard to get anything done in gloves or mittens.
Ever have the flipper mitts?:LOL:

i don't think i could do the flappers... they would annoy me in about five seconds and i would flap them right off!!!! hahaha

i think i need to get one of those squeeze toys to improve circulation or something in my hands.. maybe try to fix whats wrong instead of a warm bandaid!! 👐
 
I've tried some stupid shit in my winters.
I have the Dewalt battery sweat jacket. It works fine but the battery placement is horrible.
Haven't used it in 2 years. $75-100 for Milwaukee gloves~!
Gloves never last in my world. I buy the $5 blue latex covered cloth ones.
The circulation in my left hand seems worse this year. Never noted differences in which hand hurt more but this year oh boy.🧤
 
I've tried some stupid shit in my winters.
I have the Dewalt battery sweat jacket. It works fine but the battery placement is horrible.
Haven't used it in 2 years. $75-100 for Milwaukee gloves~!
Gloves never last in my world. I buy the $5 blue latex covered cloth ones.
The circulation in my left hand seems worse this year. Never noted differences in which hand hurt more but this year oh boy.🧤

i've been wearing a double pair of latex gloves under my other gloves. not as bad for me when i can keep them dry. hard to detail cars and keep my hands dry. these new gloves are "supposed" to be waterproof... we'll see, my opinion of waterproof and others are usually different!!

but yeah, latex with the cotton over top then i just change out the cotton when damp.. i can't do the dipped ones though, they stick to the microfiber clothes to much!! hehe

it used to be my feet that always got cold not my hands... now over the past three year it switched, my feet are never cold now and my hands are!!! wtf???
 
Dude, ya just cant get a good pair of warm gloves these days!
Im still looking for a pair that compares to my old snowmobile gloves.

I've tried some stupid shit in my winters.
I have the Dewalt battery sweat jacket. It works fine but the battery placement is horrible.
Haven't used it in 2 years. $75-100 for Milwaukee gloves~!
Gloves never last in my world. I buy the $5 blue latex covered cloth ones.
The circulation in my left hand seems worse this year. Never noted differences in which hand hurt more but this year oh boy.🧤

i've been wearing a double pair of latex gloves under my other gloves. not as bad for me when i can keep them dry. hard to detail cars and keep my hands dry. these new gloves are "supposed" to be waterproof... we'll see, my opinion of waterproof and others are usually different!!

but yeah, latex with the cotton over top then i just change out the cotton when damp.. i can't do the dipped ones though, they stick to the microfiber clothes to much!! hehe

it used to be my feet that always got cold not my hands... now over the past three year it switched, my feet are never cold now and my hands are!!! wtf???

IDK if these would work for you guys but I'll let you in on a little secret....If you've ever wondered how football players and coaches stay warm on frozen fields or what's inside the little fanny pack bag around a QB's waist he keeps putting his hands in between plays...this is what we're using

 
yeah, you're right mitten are a pita big time!! maybe look into the new electric gloves??? the tesla of handwear.. don't think i could ever do that. i would make fun of somebody doing that so can't do it myself!! :ROFLMAO:

and btw, i'm not mean when i make fun of people.. laughing at ones misfortunes is what makes the world go round!!!! :ROFLMAO:

^^^ that should be a bumper sticker!!!!!



i don't think i could do the flappers... they would annoy me in about five seconds and i would flap them right off!!!! hahaha

i think i need to get one of those squeeze toys to improve circulation or something in my hands.. maybe try to fix whats wrong instead of a warm bandaid!! 👐
I have hand exercizers, foam squeeze type & Coiled spring squeeze type, you like either one? SSgrower
 

ah yeah man, i remember when those things first came out when i was a little kid.. i actually prefer the old school ones that you light on fire and burn, i have a few of those in the gun cabinet!! ... they require a little more common sense so maybe not good for football players!!! hahahaha

I have hand exercizers, foam squeeze type & Coiled spring squeeze type, you like either one? SSgrower

do they actually work for circulation? or are they intended for a different rehab?

My buddy always has hand warmers. (y)
I bought a battery powered Dewalt heat gun this year just to blow heat at my hands~! 🥴

i saw your post of that... how well does it work? does it get to hot to use? how is it on battery life?

At my age it's more fun poking at ones self, as I do the funniest things sometimes, then laugh at myself. SS

Man im only 26 and i think i laugh at myself more than anyone else.

oh he;; yeah guys, i'm target number one for sure!!! better to make fun of yourself quick before somebody else does it!!!! hahaha

i tell my friends all the time, ya know if i didn't tell ya all the dumb shit i do you would never even know and couldn't bust my balls about it.

.
.

.

time to drop some beans!!!!!! dropping three each of Imperium X and Oreoz from B2ACG, and dip n stix, straight jacket, and periwinkle pie from Greenpoint for a total of 15 seeds.

i'll keep y'all posted!!!

☠️
 
I am not sure what Dewalt made it for~!
It is like the weakest hair dryer ever.
It makes good heat but on high it is low flow.
Still on brutal days or to warm a frozen lock it works.
Battery life is ok I guess. I have too many batteries to really worry.
Just staying out of it works better~! 🥴
 
I am not sure what Dewalt made it for~!
It is like the weakest hair dryer ever.
It makes good heat but on high it is low flow.
Still on brutal days or to warm a frozen lock it works.
Battery life is ok I guess. I have too many batteries to really worry.
Just staying out of it works better~! 🥴
Lol. ya we havnt worked in almost 3 weeks.dont look like we will make it in till friday. Gota pick your battles this time of year.
 
I am not sure what Dewalt made it for~!
It is like the weakest hair dryer ever.
It makes good heat but on high it is low flow.
Still on brutal days or to warm a frozen lock it works.
Battery life is ok I guess. I have too many batteries to really worry.
Just staying out of it works better~! 🥴

nothing like getting a tool review from an actual worker, online reviews can be so fake!!

.
.

didn't even officially get to 12/12 yet but a couple of my plants didn't get the memo...

watermelon gelato, max A/C, and ARC..

008.JPG009.JPG010.JPG

family shot....

011.JPG

.
.

beans officially dropped, heaters on...

giphy (3).gif
 
I am not sure what Dewalt made it for~!
It is like the weakest hair dryer ever.
It makes good heat but on high it is low flow.
Still on brutal days or to warm a frozen lock it works.
Battery life is ok I guess. I have too many batteries to really worry.
Just staying out of it works better~! 🥴
Those little heat guns are really only any good for heat shrinks. Keeps ya from burning a torch down in a hole if you gotta fix a fault somewhere.
 
12/12 brother~! :cool:
You've been waiting to pull leaves.
Definitely get some feed to them after clean up.
I always miss something, I think.
Have you checked in with VG?
 
12/12 brother~! :cool:
You've been waiting to pull leaves.
Definitely get some feed to them after clean up.
I always miss something, I think.
Have you checked in with VG?

giphy.gif


ah yeah!! 12/12 is finally here!!!! been waiting all week!!!!

cleaning them all up right now... got three of the eight done so far. the ARC made me stop and come upstairs to wash my hands, she was already sticky!!! i'll get some pics up soon as i finish them all. i'm giving them a good healthy sprinkling of bloom nutes and topping them all off with fresh soil.

so far the arc was a little light so at least that one so far will need a good watering!

and i peeked in on the VG, saw some life on a bunch but didn't open it to disturb them, just looking down from the top. if i have enough time tonight i might open it up and make sure none are growing weird or need to be helped at all...

exciting stuff going on though... makes it a lot of fun!! my plants look shorter than normal but i need to remember i took out my turntable and sub flooring i had in there so i gained almost seven inches just from the flooring alone so it's awesome to have extra headroom at this point of the game!!!

these plants are smaller and shorter than i remember growing so it will be interesting to see how the yield is. really pumped to have eight strains.. variety is the spice of life!!!

pics in a bit...
 
got a little side tracked.. got roped into watching the finale of hells kitchen!!

got them all trimmed and topped off and watered in!!! light is at a premium at every bud site!!!!

002.JPG

003.JPG

004.JPG

001.JPG

not sure how to call it so i'm resetting the calendar and calling this day one of 12/12.. i'll use this spectrum until the last two weeks.

005.JPG

the next batch is showing signs life!!!!

012.JPG008.JPG

i see life from each seed so far so fingers crossed and i see no reason to change anything or call any audible at this point... we'll see how they look tomorrow or the next day!!

010.JPG011.JPG

🙃🙂🙃
 
It's weird because I can't get into Gordon Ramsay or Hells Kitchen but he really surprised me with the show on NatGeo called Uncharted.
Equal parts cooking and travel reminds me of Anthony Bourdain. Ramsay isn't so crazy yelling at people on that show and gets humbled often by other chefs. Hoping they do a season 4 but it may be over since season 3 was way back in 2021

Plants are looking great!🤘
Every time you and Steam talk about what you're doing with the timers this song is playing in my head 🙃

 
Back
Top Bottom