Stoney's Luv Shack

[Stoneyluv]

oh shit i just got the name... Mahindra

took me like what two hours.... yeah bro i don't need any loud... hehe

 

[Bandit420]

oh shit i just got the name... Mahindra

took me like what two hours.... yeah bro i don't need any loud... hehe

She's a mother of three working her way thru college on the pole.
Yeah I coulda gone with Chantazz, Porsha, or Destinee, but Mahindra in a black & rose silk pla just has that tractor ass vibe to it

 

[SiamSam]

no monkeying around!! my buddy says that all the time!!! haha

so is the tv show made from the first book and then the other books continue the story past what the tv show went?



haha he's even in the same pose!!!! a neighbor just down the road has one in their yard... always gets double takes going by!!!

man i was really wondering how much i should try... the bottle directions seem so weak. i know i won't be drinking a 1/4 bottle of the freedom and a whole bottle of loud after hearing that!!!!! hahahaha

i'll heave warning though, total lsd rules... no power tools, no motorized vehicles, and no firearms!! got it!!! hehehe

i think i'm gonna drink some tomorrow for the race... i ain't got shit to do! i hope it stretches into bedtime like it did you, i love a good deep sleep from edibles!!!



ah snap, she's in 3d!!!! way better than what i had in my head!!!!!

love the chi town artwork brother!!!!

i got my vivosun fan today, i haven't opened it up yet... i still gotta run out and get that sheet of plastic for my drip tray, they're open late on a saturday so i'm not rushed!!

if everything works out as planned i should get two trays from the one sheet. they'll be 44" x 44" and have a 2" tall sides. i measured my stuff and the containers are about 40" end to end so they should fit good.

just wish i had an extra 4 square feet in there.. we'll see what happen after this grow.i always have the option of tearing down the divider wall between my cabinets and opening up a 44 x 88 inch space that would fit eight plants nice.. before i get ahead of myself i want to see how the six i have now do. i feel i'm stuffing the six in there right now and maybe should have only four.

all in due time!!!

The second book goes back in time with the whys wherefores plans and who shot Paul...and serves up a plausible reason for the whole thing.

 

[Stoneyluv]

She's a mother of three working her way thru college on the pole.
Yeah I coulda gone with Chantazz, Porsha, or Destinee, but Mahindra in a black & rose silk pla just has that tractor ass vibe to it

she' a mom of three!! ... no baby daddy to help... that would be the only time that i think i could work in some glitter filament!!!

The second book goes back in time with the whys wherefores plans and who shot Paul...and serves up a plausible reason for the whole thing.

alright i'm gonna check the torrent site i belong to and see if they have it... are the books called the silo?

.
.
.
.


had a chance to check out my new vivosun E6 oscillating fan. I like it very much. it has a few differences from the infinity cloudray s6 but very comparable as well.

the clamps are pretty much the same.. strong holds to square and round, both about equal strength...



the vertical angle is more adjustable on the vivosun, both up and down equal amounts 40 degrees i believe...



the new one has a smaller ass.... no, i'm not talking about Chantazz, Porsha, Destinee, or Mahindra.. i'm talking the vivosun fan!!



this is because the infinity has the power supply in built into the motor housing. where the vivosun has an external power supply via a wall wart..



upside/downside with that. if the power supply burns up it's ez to get a 12v one and wire it up. also the external only has low voltage going to fan making the cord thinner. the downside is it's a wall wart and may take up more room at the outlet than infinity. for some this make a difference.

the infinity has built in controls for ten speeds and the vivosun only has five. it can have ten speeds if used with vivosun controller. vivosun also has a natural air mode or something like that. to me it seems overrated and not needed. it changes the fan speeds slow to fast and back down again to simulate a more natural wind... to me it's either underperforming or overperforming... i like the sweet spot, not back and forth.

and they both have auto resume if power is dropped.

so i can't put reliability into the equation yet because i just go them but we'll find that out together here!!! but if they would both last the same amount of time and work just as good then i would buy the vivosun again.

 

[Bandit420]

she' a mom of three!! ... no baby daddy to help... that would be the only time that i think i could work in some glitter filament!!!



alright i'm gonna check the torrent site i belong to and see if they have it... are the books called the silo?

.
.
.
.


had a chance to check out my new vivosun E6 oscillating fan. I like it very much. it has a few differences from the infinity cloudray s6 but very comparable as well.

the clamps are pretty much the same.. strong holds to square and round, both about equal strength...

View attachment 14615

the vertical angle is more adjustable on the vivosun, both up and down equal amounts 40 degrees i believe...

View attachment 14618

the new one has a smaller ass.... no, i'm not talking about Chantazz, Porsha, Destinee, or Mahindra.. i'm talking the vivosun fan!!

View attachment 14616

this is because the infinity has the power supply in built into the motor housing. where the vivosun has an external power supply via a wall wart..

View attachment 14617

upside/downside with that. if the power supply burns up it's ez to get a 12v one and wire it up. also the external only has low voltage going to fan making the cord thinner. the downside is it's a wall wart and may take up more room at the outlet than infinity. for some this make a difference.

the infinity has built in controls for ten speeds and the vivosun only has five. it can have ten speeds if used with vivosun controller. vivosun also has a natural air mode or something like that. to me it seems overrated and not needed. it changes the fan speeds slow to fast and back down again to simulate a more natural wind... to me it's either underperforming or overperforming... i like the sweet spot, not back and forth.

and they both have auto resume if power is dropped.

so i can't put reliability into the equation yet because i just go them but we'll find that out together here!!! but if they would both last the same amount of time and work just as good then i would buy the vivosun again.

Good info man.
I know I already dislike that external power supply. Outlet real estate has become real tight with all the winches and stuff I put in. My light mover uses that same type of plug and yep it takes two spaces or I plug it in on the end of a power strip. I'm gonna have to add another power strip.

I'll be really curious if they work with the ACI controller even though my vivos won't be on a controller at least for now since I can get to them

 

[Rootsruler]

the infinity has built in controls for ten speeds and the vivosun only has five. it can have ten speeds if used with vivosun controller. vivosun also has a natural air mode or something like that. to me it seems overrated and not needed. it changes the fan speeds slow to fast and back down again to simulate a more natural wind... to me it's either underperforming or overperforming... i like the sweet spot, not back and forth.

I agree. I get that you want a more natural, varying wind but I'm not sure how much more beneficial that would be versus a constant wind speed. I bought a 10" fan oscillator for the 5 x 5 and I plan on changing the wind speed every couple days manually so no need for the automation but it is nice to have.

Are you running the ACI Controller 69 Pro Wifi? I've heard they have some issues with fans or did they fix that issue?

 

[Rootsruler]

Good info man.
I know I already dislike that external power supply. Outlet real estate has become real tight with all the winches and stuff I put in. My light mover uses that same type of plug and yep it takes two spaces or I plug it in on the end of a power strip. I'm gonna have to add another power strip.

I'll be really curious if they work with the ACI controller even though my vivos won't be on a controller at least for now since I can get to them

I'm debating on whether to move the power strip I have mounted on the corner pole and relocate it towards the center of the tent or at the roof corner above the entrance. It would make routing wires and cables easier. I was also looking at a wide spaced 10 plug bar to hang over the entrance for easy access and better wire routing.

 

[Zen_seeker]

I agree. I get that you want a more natural, varying wind but I'm not sure how much more beneficial that would be versus a constant wind speed. I bought a 10" fan oscillator for the 5 x 5 and I plan on changing the wind speed every couple days manually so no need for the automation but it is nice to have.

Are you running the ACI Controller 69 Pro Wifi? I've heard they have some issues with fans or did they fix that issue?

Last I heard still working on it.

I think the more natural setting is like my standup tower. I think it would avoid wind burn. Just a guess.

 

[Zen_seeker]

I'm debating on whether to move the power strip I have mounted on the corner pole and relocate it towards the center of the tent or at the roof corner above the entrance. It would make routing wires and cables easier. I was also looking at a wide spaced 10 plug bar to hang over the entrance for easy access and better wire routing.

I go up first. Never spill water up.

 

[Rootsruler]

I go up first. Never spill water up.

That's true. Physics only works one way!!

 

[Rootsruler]

Last I heard still working on it.

I think the more natural setting is like my standup tower. I think it would avoid wind burn. Just a guess.

I was going to employ a tower fan for air circulation but decided the desktop oscillator mounted on the roof was a better option although the tower could pull double duty as below and above canopy air circul;ation.

 

[Bandit420]

Great race but wow lots to unpack after yesterday!
So...as we know, Hamlin is a punk ass chump and had to make sure we all knew it yesterday just in case there were any doubters
Everybody has road rage
NBC stepped up and actually had a pretty good broadcast
Dillion throws his helmet like his name is Chantazz
Pocono is a gorgeous track venue
If Preece and Lajoie ever fight in a steel cage match I'm taking Preece
Sucks for Larson and I liked him making fun of Hamlin and dropping a S bomb but go ahead and let a few F bombs fly on national tv Kyle, we can handle it and he deserves to let it out.
Suarez is a conspiracy theorist on the track and did he really call the rest of the field "Squirrels"? We were laughing about that all evening and it's made it's way into our daily vocabulary
I like the crew chief change on the 14. A lot more chatter on the scanner and the discussions remind me a lot of the #5 team. Sounds like they've wiped their data clean and are starting from scratch in races now, like they were working with bad info all year.. It has it's growing pains but they're building something special on the 14 team
I miss anything?

 

[Stoneyluv]

Good info man.
I know I already dislike that external power supply. Outlet real estate has become real tight with all the winches and stuff I put in. My light mover uses that same type of plug and yep it takes two spaces or I plug it in on the end of a power strip. I'm gonna have to add another power strip.

I'll be really curious if they work with the ACI controller even though my vivos won't be on a controller at least for now since I can get to them

i don't have one to try but from what i read, no they don't communicate. the vivosun uses a standard usb c cord for comms and the infinity has a different pinout. same connector, just different pinout. so with a little soldering and heat shrink you could make them all talk with each other.

from what i read people like the vivosun controller and app much better. oscillation is controlled via controller and app on the vivosun too..

the one fan i have with a wall wart and it's no biggie for me... but a few of them and i wouldn't like it. if it burns up i'll replace it with a laptop type power supply that has wire on both sides of the xformer.

but if you buy a special strip just for the vivosun make sure it's a normal orientation because vivosun is sideways. I have a power strip with the outlets already sideways to help with normal wall warts then i get this fan and the plug is sideways!!! grrr..

one cord i use sometimes to beat the warts are these one foot cords...they make the wart more of a dongle instead of taking up room at the outlet..

dongle!!!!

and just so i can get in the other funny word you like,,,,, the other day i was having issues on my printer so i changed out the nozzle and now it's all good again!!! it was clogged a little just above the nozzle... three colors of filament came out of it when i cleaned it!!!!


there, now i got in dongle and nozzle in the same post!!!!!

I agree. I get that you want a more natural, varying wind but I'm not sure how much more beneficial that would be versus a constant wind speed. I bought a 10" fan oscillator for the 5 x 5 and I plan on changing the wind speed every couple days manually so no need for the automation but it is nice to have.

Are you running the ACI Controller 69 Pro Wifi? I've heard they have some issues with fans or did they fix that issue?

no sir, i don't have a controller for either brand at all. both my fans are in the doorway so it's very ez for me to reach them. not sure if i'll get a controller down the road or not, it would only be for cool factor though.

Last I heard still working on it.

I think the more natural setting is like my standup tower. I think it would avoid wind burn. Just a guess.

the lower speeds it fluctuates down to i would agree it would prevent wind burn. but the setting makes the fan travel all the speeds and anything above six is way too much in my space so i'm afraid if i turned this feature on it could cause wind burn... not taking the chance, i have it on a nice movement right now and i'm not sure what speed number it is but i just watch the plants and i really like having the option of so many speed settings.

Great race but wow lots to unpack after yesterday!
So...as we know, Hamlin is a punk ass chump and had to make sure we all knew it yesterday just in case there were any doubters
Everybody has road rage
NBC stepped up and actually had a pretty good broadcast
Dillion throws his helmet like his name is Chantazz
Pocono is a gorgeous track venue
If Preece and Lajoie ever fight in a steel cage match I'm taking Preece
Sucks for Larson and I liked him making fun of Hamlin and dropping a S bomb but go ahead and let a few F bombs fly on national tv Kyle, we can handle it and he deserves to let it out.
Suarez is a conspiracy theorist on the track and did he really call the rest of the field "Squirrels"? We were laughing about that all evening and it's made it's way into our daily vocabulary
I like the crew chief change on the 14. A lot more chatter on the scanner and the discussions remind me a lot of the #5 team. Sounds like they've wiped their data clean and are starting from scratch in races now, like they were working with bad info all year.. It has it's growing pains but they're building something special on the 14 team
I miss anything?

yeah you pretty much covered it all!!!

i'm sure hamlin isn't getting a xmas card from larson this year. i never heard larson so mad before, he was pretty mad and i'm glad cliff daniels said something to him at the end so he didn't do anything stupid. but i think that ruined their friendship. but fuck it, who wants friends like that anyway!!! sucks for the rest of hamlins team though, they had to stay in the poconos last night with the locals while bitch ass hamlin flys out!!!

and yeah man the poke your nose is a sweet sweet area... it will never be commercialized there and it is always a beautiful place to vacation. winters can get pretty rough up there but still gorgeous country!! i inherited my grandfathers house up there in bear creek and it's one of the nicest places on the planet bro!!!! wildlife for miles and miles!!!!

and i'm not sure if they showed it or not i didn't watch the prerace stuff but that race track is all green energy and gets it's power from panels. and they don't even add emissions to cut the lawn where the panels are... they have sheep!!!

and yeah dillion needs to reach out to tony stewart on helmet throwing lessons!!!!!!!!!!!

i really like the 14's new crew chief, i was listing in to their radio yesterday and really enjoyed the communication they have with each other already!!!

but bro i totally missed the squirrely comment.... i'll look on the tube later.

i didn't watch much at the end, i think i was more bitter than larson even was... i went out and mowed the lawn. this was mow number four on the year, i'm a true slacker when i comes to grass. but i only burn gallons a month for lawn, these fuckers around me are using huge mowers and cutting four to five times a month... it doesn't help the earth having all the useful grass and then pumping pollution in the air just to keep it looking perfect!!!

i didn't do much to the grow at all. i got the material for the drip tray and put it together without making any mistakes so now i have a piece left over big enough to make a second tray for the other cabinet!! i din't put it in place yet i was kind of waiting for these pedestals for under the plants so the pots weren't just sitting on smooth plastic and i didn't want to take a chance on any runoff pooling under them at all. so i picked up a six pack of these...



if it works out i may be able to "slide" the plants out at harvest making almost as ez as the turntable. i'll post up some pics later after i take all that nasty plastic sheeting out and pull down the duct tape!!!

 

[Stoneyluv]

when i set the tray in it hurt my eyes it was so bright... i was like uhhh turn your lights down ya fart nozzle!!!



i put some lumber under the plywood to try and angle it towards the front right corner and i have a few inches of space to the floor so i could easily print something that could funnel from the tray to a catch jug, only if i need to though i'd rather not put any holes in it, it's brand new!!



i was able to use my welder to heat up the sides and bend them up on all four sides so the only seams i have are in the corners so it was pretty ez to seal up. i was actually very shocked how ez this was to make. you can see i had runoff sitting in the saucers by the dirt ring... that's no good. so now i should be good especially with the pedestals to lift them up an inch. btw, they don't slide.

so now we got bigger lights....



bigger containers....



bigger fans....



i feel like i just got rid of my dipper and got my first pair of big boy pull ups on!!!!!!







.
.

these will be in the next round for sure!!!!



have a great week everybody!!!!!!!!!!!!!!!!!!!!!!

 

[Bandit420]

when i set the tray in it hurt my eyes it was so bright... i was like uhhh turn your lights down ya fart nozzle!!!

View attachment 14923

i put some lumber under the plywood to try and angle it towards the front right corner and i have a few inches of space to the floor so i could easily print something that could funnel from the tray to a catch jug, only if i need to though i'd rather not put any holes in it, it's brand new!!

View attachment 14927

i was able to use my welder to heat up the sides and bend them up on all four sides so the only seams i have are in the corners so it was pretty ez to seal up. i was actually very shocked how ez this was to make. you can see i had runoff sitting in the saucers by the dirt ring... that's no good. so now i should be good especially with the pedestals to lift them up an inch. btw, they don't slide.

so now we got bigger lights....

View attachment 14924

bigger containers....

View attachment 14925

bigger fans....

View attachment 14926

i feel like i just got rid of my dipper and got my first pair of big boy pull ups on!!!!!!

View attachment 14928

View attachment 14929

View attachment 14930

.
.

these will be in the next round for sure!!!!

View attachment 14922

have a great week everybody!!!!!!!!!!!!!!!!!!!!!!

When did you start doing work for the Department of Forestry Dude? Holy smokes!!!
So they went ahead and S1'd GG#4? Those dirty rotten sumbitches know how to get us don't they?

Your tray came out tits Man. I saw these potting mats on Amazon and meant to show you but you made something way better than these things

Amazon.com

Great call on the risers too! I often forget and take for granted the drain channels in my trays but yeah gotta keep those feet up off the floor.
And yep I gotta few of those 1' dongles hahaha! Using one on my Ruck fan now since I made it's cord super short. With the 1 foot dongle it's just long enough now.

But yeah man Suarez is a weird dude. I think he was just rattled after being in a 180mph wreck but in his interview after being released from the infield care center he thought he was in the back of the pack with the "squirrels" and got intentionally wrecked. But he was actually in the middle of the pack, cars around him were trying to avoid the wreck happening in front of them, I think it was the Logano wreck, and he got bumped and collected. Nothing intentional but he just thought it happened another way.
And speaking of Logano...The driver of that tow truck fucked his ride up dragging it around like that!!! He was all crying on the radio, "They're tearing my nose off!" hahahaha!!!

 

[Stoneyluv]

When did you start doing work for the Department of Forestry Dude? Holy smokes!!!
So they went ahead and S1'd GG#4? Those dirty rotten sumbitches know how to get us don't they?

Your tray came out tits Man. I saw these potting mats on Amazon and meant to show you but you made something way better than these things

Amazon.com

Great call on the risers too! I often forget and take for granted the drain channels in my trays but yeah gotta keep those feet up off the floor.
And yep I gotta few of those 1' dongles hahaha! Using one on my Ruck fan now since I made it's cord super short. With the 1 foot dongle it's just long enough now.

But yeah man Suarez is a weird dude. I think he was just rattled after being in a 180mph wreck but in his interview after being released from the infield care center he thought he was in the back of the pack with the "squirrels" and got intentionally wrecked. But he was actually in the middle of the pack, cars around him were trying to avoid the wreck happening in front of them, I think it was the Logano wreck, and he got bumped and collected. Nothing intentional but he just thought it happened another way.
And speaking of Logano...The driver of that tow truck fucked his ride up dragging it around like that!!! He was all crying on the radio, "They're tearing my nose off!" hahahaha!!!

yeah you know greenpoint is gonna mix that gg4 with everything they have next... i've been proud of myself i haven't looked at an auction in over a week!!! i gotta use that coupon soon though!!! hehe

ya know if i didn't make that tray i would have bought one of those mats... seems better than the thin sheeting i had. anything is better than doing it that way!! and man i'm so glad i went with the risers too and even more so today... turns out the plants are much easier to move around with the lifts, spins really smooth too. it helped quite a bit today when i gave them a well overdue trimming. looking closely at your tray is made me want to get those risers to begin with. your trays design is also why i tilted the whole thing to one corner because it looks like all your drain veins lead to that sump on your tray and I really wanted to achieve the same principle of nothing pooling under the containers and also having all the spills go to one dedicated spot on the tray where a plant doesn't sit. so i feel i tricked my setup into believing it has those same features.

so yeah i trimmed all this off tonight....



now you can see the forest through the trees sort of speak....



that really seemed to help with them not being so squashed in, they seem to have some room to breathe now and should help them out growing forward. i know it sure does give the new fans a better fighting chance!!!



hey i wanted to ask you did you notice the oscillation is louder from the vivosun than the infinity? almost seems like the infinity is quieter overall even the fan part. on high they're both noisy but on lower speeds the vivosun seems to make more noise on mine. idk.. noise means friction which means wear. so i might change my mind and get another infinity instead.

.
.
i looked for the suarez interview but could only find the secondary one, not the nbc one... but yeah lagayno totally deserved that!!!! maybe if he would have been just a little more respectful of the crew trying to help him they would have cared more!!!

it was like a bubba tantrum!!!! hahahahahaha

usually drivers don't get so mad at pocono, not this year!!!

and now bring on short track richmond,,, they'll be swinging jack handles at each other like the old days!!!!

 

[Bandit420]

Nice and clean in the nether regions!

I tilt my tray as well. At one end is a 2"x4" the same width of the tray to lift one end up then I use three aluminum rails to support the tray. If there's a lot of run off it all goes down to the sump part of the tray and I pick it up with the shop vac if it's a lot. But if it's just a light film of water it dries up pretty fast.

The Vivo is a little louder I agree. Also slower on the oscillation but it could be since I have mine on it's side going up and down.
So far it's a toss up. I like both and each has a little something better than the other but yeah I think the ACI has a slight edge. Vivo controller does look better though.
I think a good duel is what I have going with the two vertical fans. They're both being used in ways I'm sure Vivo and ACI would not approve but it's thru grow room abuse we find out what holds up. Not gonna beat the shit out of these fans but what I need them to do outweighs company ideas on how to use them. Which ever vertical dies first will likely decide for me but if both hold up for three or more years after what I put them thru I'll consider both to be pretty darn good little fans.

I think desperation is setting in for a lot of teams and each week it just gets more intense. Like the playoffs have already begun!
Gonna be a wild weekend!!

 

[Stoneyluv]

Nice and clean in the nether regions!

I tilt my tray as well. At one end is a 2"x4" the same width of the tray to lift one end up then I use three aluminum rails to support the tray. If there's a lot of run off it all goes down to the sump part of the tray and I pick it up with the shop vac if it's a lot. But if it's just a light film of water it dries up pretty fast.

The Vivo is a little louder I agree. Also slower on the oscillation but it could be since I have mine on it's side going up and down.
So far it's a toss up. I like both and each has a little something better than the other but yeah I think the ACI has a slight edge. Vivo controller does look better though.
I think a good duel is what I have going with the two vertical fans. They're both being used in ways I'm sure Vivo and ACI would not approve but it's thru grow room abuse we find out what holds up. Not gonna beat the shit out of these fans but what I need them to do outweighs company ideas on how to use them. Which ever vertical dies first will likely decide for me but if both hold up for three or more years after what I put them thru I'll consider both to be pretty darn good little fans.

I think desperation is setting in for a lot of teams and each week it just gets more intense. Like the playoffs have already begun!
Gonna be a wild weekend!!

man the plants loved their new down there care i gave em. all kinds of girly parts shootin out!!!

i put in some longer stripper poles in so i can get more air movement under their skirts. but even at normal position the infinity is faster oscillation than vivosun about twice as fast..



the new fans brought down my rh a little better too... and yeah, that's the best co2 i'm gonna get here.




View attachment DSCN0815.MOV

.
.

so today i picked up some toppings to make some pizza this weekend. normally i just but store brand plain sauce and doctor it up from there, well check it out bro they were listening!!!



no extra sugar!!!! got my favorite classic toppings too... mushroom and pepperoni!!!

more on this later...

 

[SiamSam]

man the plants loved their new down there care i gave em. all kinds of girly parts shootin out!!!

i put in some longer stripper poles in so i can get more air movement under their skirts. but even at normal position the infinity is faster oscillation than vivosun about twice as fast..

View attachment 15500

the new fans brought down my rh a little better too... and yeah, that's the best co2 i'm gonna get here.

View attachment 15499


View attachment 15501

.
.

so today i picked up some toppings to make some pizza this weekend. normally i just but store brand plain sauce and doctor it up from there, well check it out bro they were listening!!!

View attachment 15498

no extra sugar!!!! got my favorite classic toppings too... mushroom and pepperoni!!!

more on this later...

Anchovies please

 

[Stoneyluv]

Anchovies please

Hell yeah!!! that's a damn good lookin pie right there!!!!!! if i wasn't hungry enough i sure am now!!!!

 

[SiamSam]

Hell yeah!!! that's a damn good lookin pie right there!!!!!! if i wasn't hungry enough i sure am now!!!!

Always a spot at my table 4 U. Finished all the books. Mind blown beyond belief, so powerful after seeing the show. It is a must read.

 

[Bandit420]

Man pizza does sound great today!!!!
I don't really feel like going out in this heat and manning the oven so I may have to order Conan's. And hell yeah on the anchovies and in fact, throw a little xtra on there too.
But you can't have a pizza party and forget the ice cream.....

 

[Stoneyluv]

Always a spot at my table 4 U. Finished all the books. Mind blown beyond belief, so powerful after seeing the show. It is a must read.

very kind of you sir!

ya know i've been meaning to tell you that i downloaded the first one in an e-book format! i gotta download a reader on my phone so i can maybe get into it sometime.

Man pizza does sound great today!!!!
I don't really feel like going out in this heat and manning the oven so I may have to order Conan's. And hell yeah on the anchovies and in fact, throw a little xtra on there too.
But you can't have a pizza party and forget the ice cream.....

View attachment 15596

man you're killing it on the ice cream this summer!!!! i'm ashamed of the ice cream i have in the freezer right now... i've been on an anti sugar kick for a few months now and all i have is this no sugar added vanilla.... diets only last so long!!!!

so you guys have been posting the pizzas and masking me so hungry!!! well i finally got mine!!! and i took pics so maybe i can return the favor and make you guys jelly!!!

it all starts with my favorite part, stretching the dough!!! any of you cats daring enough to spin it in the air? not me... i tried once..



then comes the herbs and sauce... a little garlic powder too!!



next ya smother it in cheese... 85% mozz and 15% cheddar!!!



then the toppings!!! classic mushroom and pepperoni this round, and more herbs!!!



oil the crust good and set the oven for 420...



wait 25 minutes,,,, and done!



i normally put on way more pepperoni but i didn't have any pre sliced and i had run all my luck out on the finger remover 2000 so this is what we got!!



and i still have all my fingers!!!!!!!! it was a good day!!!

 

[Cool_Beans]

YUM!

Smoked mozz, sausage and wild mushroom is my #1 pie.

 

[Stoneyluv]

Just starting week three of flower... gave them their first feeding yesterday. they got kelp4less bloom pack, awakening, and extreme blend. along with some neptunes and fertile urchin.



Scout snacks...



topanga cookies...



zangria...



time is moving along fast this round.. i was having some issues getting my water jug to the back row without roughing up branches in the front row so i made me a watering tube, don't even have to bend over anymore



some future porn...





have a great hump day everybody!!!!!!!!!!!!!!

 

[Bandit420]

Me catching up and seeing that pie....



And again looking at the plants



Double damny whammy!!!

Love the 3D printer work on the funnel too man. I made a watering can with xtra long snout for watering airpots that have plants with leaves covering the soil surface. It's like almost every hurtle can be solved with a 3D printer

Take it ez Buddy and happy hump day! First day of Fall camp here so I'll be grinding but still lurking for the next few weeks. August just sucks bro. Long days, late nights, cereal and sandwiches for dinner but every day is one day closer to the next vacation!!

Which reminds me...If you had never been to either, which would you pick...New Hampshire or Pocono?

And you won't believe this but for the first time in many years I'm skipping the OU game in favor of playoff racing at Fort Worth. Last year was rough driving up for the race then going back the next week for the game so this year we're just doing the race. So yeah I think I'm addicted brother. First it was Chicago just to see a race and now cancelling a football game in favor of a race.
And to think it all started with you talking about Larson and racing then one day us deciding to go to COTA to see wth ol Stoney's talking about.
Life hasn't been the same since

 

[Stoneyluv]

Me catching up and seeing that pie....

View attachment 16235

And again looking at the plants

View attachment 16235

Double damny whammy!!!

Love the 3D printer work on the funnel too man. I made a watering can with xtra long snout for watering airpots that have plants with leaves covering the soil surface. It's like almost every hurtle can be solved with a 3D printer

Take it ez Buddy and happy hump day! First day of Fall camp here so I'll be grinding but still lurking for the next few weeks. August just sucks bro. Long days, late nights, cereal and sandwiches for dinner but every day is one day closer to the next vacation!!

Which reminds me...If you had never been to either, which would you pick...New Hampshire or Pocono?

And you won't believe this but for the first time in many years I'm skipping the OU game in favor of playoff racing at Fort Worth. Last year was rough driving up for the race then going back the next week for the game so this year we're just doing the race. So yeah I think I'm addicted brother. First it was Chicago just to see a race and now cancelling a football game in favor of a race.
And to think it all started with you talking about Larson and racing then one day us deciding to go to COTA to see wth ol Stoney's talking about.
Life hasn't been the same since

that's the turbo funnel!!!!! haha i remember when they first came out on tv, i think i paid full price for two of them once... now i print one out for 0.51¢

bro i was so hoping you were still on vaycay.. well keep hydrated man! i saw last month arizona was the highest recorded temperature in any state ever. and you ain't far from there so i can't even fathom the heat you endure. we just ended a month long heat wave ourselves.. you're gonna laugh at me but it was in the low 90's EVERYDAY!!! for me that's hot, i get grumpy over 88* so july sucked a little. sunday the heat broke and i don't think it went above 80 that day... it's 61 out right now in the middle of the night... windows open, house fan on!!!

well i'd probably pick new hampshire but that's only because i never been there. plus it could be fun to piss off an entire state making fun of the 22!!!! hahaha but pocono is awesome from the infield if you have a big bus to stand on, other than that all you get is the start finish and pits, you can't see turn one or turn three, the infield you normally can see one and two and not three or pits at all. the family area gets the tunnel turn three but can't see the rest of the track at all. and the side boards suck there they only show like the top five if i remember.. almost better to watch on tv.

NH is a much smaller track and i bet you can see almost the whole thing from the stands. but i never been, i was to new england dragway four times though. only about a five hour drive from here.

what you thinkin of maybe seeing one at either next year? if so man, i'd love to go with ya, which ever one you choose i'd be down.

man nascar got in your blood quick!!! i've seen it happen a bunch!! like 30 years ago i started dating cindy and she lived with her older brother and one sunday i show up with a cooler of beer and took over his remote and talladega was on, he asked why are those cars going faster... i explained the draft and that was it he was hooked from that second on... the very next day we're out on the highway drafting tractor trailers in his neon!!! hahaha

he roots for anyone with a funny name.. dick trickle, buckshot jones, greg biffle... he loved those guys!!!!

but yeah nascar over the OU game.. that's saying something there!!!!!! that's not the world fair trip is it?

.
.

two of the tall branches on the front zangria were out of control and affecting how high i had to raise the lights to give them coverage and it wasn't working for me so i gave them both the ol kink a roo... and tied em over with a printed clip, like ya say anything is possible with a 3d printer..





it leveled the canopy much better and i should be ready for the distance now...



i also noticed i had some gnats!! got em on the tanglefoot!!



check this one out bro, it caught the bug on a piece of hair stuck to it upside down in mid air... how cool is that?!?!?!



so i hung a few more. i only printed five so i think i might want more...



great bug stuff!!!!!!!!!!!! works for mice too!!!!

keep cool man, stay in the shade!!

 

[Bandit420]

that's the turbo funnel!!!!! haha i remember when they first came out on tv, i think i paid full price for two of them once... now i print one out for 0.51¢

bro i was so hoping you were still on vaycay.. well keep hydrated man! i saw last month arizona was the highest recorded temperature in any state ever. and you ain't far from there so i can't even fathom the heat you endure. we just ended a month long heat wave ourselves.. you're gonna laugh at me but it was in the low 90's EVERYDAY!!! for me that's hot, i get grumpy over 88* so july sucked a little. sunday the heat broke and i don't think it went above 80 that day... it's 61 out right now in the middle of the night... windows open, house fan on!!!

well i'd probably pick new hampshire but that's only because i never been there. plus it could be fun to piss off an entire state making fun of the 22!!!! hahaha but pocono is awesome from the infield if you have a big bus to stand on, other than that all you get is the start finish and pits, you can't see turn one or turn three, the infield you normally can see one and two and not three or pits at all. the family area gets the tunnel turn three but can't see the rest of the track at all. and the side boards suck there they only show like the top five if i remember.. almost better to watch on tv.

NH is a much smaller track and i bet you can see almost the whole thing from the stands. but i never been, i was to new england dragway four times though. only about a five hour drive from here.

what you thinkin of maybe seeing one at either next year? if so man, i'd love to go with ya, which ever one you choose i'd be down.

man nascar got in your blood quick!!! i've seen it happen a bunch!! like 30 years ago i started dating cindy and she lived with her older brother and one sunday i show up with a cooler of beer and took over his remote and talladega was on, he asked why are those cars going faster... i explained the draft and that was it he was hooked from that second on... the very next day we're out on the highway drafting tractor trailers in his neon!!! hahaha

he roots for anyone with a funny name.. dick trickle, buckshot jones, greg biffle... he loved those guys!!!!

but yeah nascar over the OU game.. that's saying something there!!!!!! that's not the world fair trip is it?

.
.

two of the tall branches on the front zangria were out of control and affecting how high i had to raise the lights to give them coverage and it wasn't working for me so i gave them both the ol kink a roo... and tied em over with a printed clip, like ya say anything is possible with a 3d printer..

View attachment 16309

View attachment 16312

it leveled the canopy much better and i should be ready for the distance now...

View attachment 16310

i also noticed i had some gnats!! got em on the tanglefoot!!

View attachment 16311

check this one out bro, it caught the bug on a piece of hair stuck to it upside down in mid air... how cool is that?!?!?!

View attachment 16313

so i hung a few more. i only printed five so i think i might want more...

View attachment 16314

great bug stuff!!!!!!!!!!!! works for mice too!!!!

keep cool man, stay in the shade!!

That's pretty much the same way I control stretch on my ladies with the net and lightning hook. Hey it works and that's all that matters!!!

I've been really lucky on bugs but have a new can of the spray on tanglefoot. I ran out of the paint on version and got the spray being really curious but haven't had to use it yet. Which I don't mind at all hahaha!

Yeah I'm kicking around some ideas for next year. Funny you said NH because that was my first choice thought too. I bet they sell lobster rolls at that race! I know, I'm always thinking of food pairings with my travel.
That's funny about liking drivers with funny names because that's how I pretty much picked Briscoe from the lineup. It reminded me of brisket.
Yeah that's state fair OU game. Yep. Deep fried lobster and other delicacies....turkey legs...yelling OU sux every 5 minutes...all of it on the shelf this year.
Last year was just brutal. The race was like 5 hours long and TMS was a screaming hot skillet that day. Then 5 days later we did it again going to the game. It's a 5 hour round trip drive I'm not very fond of either.
Plus we've been to that game so many times for so many years a break will be nice and maybe we'll miss it again, who knows. I'll save some cash on hotel and fair spending and just enjoy the weekend on my sofa watching the game.

Man you hear about Gragson? He might be getting the Larson treatment over some stupid shit. My guy liked an offensive pic on IG and cancel culture is coming for his head. Legacy suspended him and also leaked he may not be with the team next year.
In a way, I'm not mad about that because they may have changed the name but that organization still sucks ass. I felt he was an odd fit there but it is Cup and not many rides to go around so take one when it's offered. And the social media shit is just a stupid and lazy excuse to drop the hammer on the guy. Over a fucking "like" FFS. This thin skinned, Charmin soft era of humanity is garbage. Like jackoffs have nothing better to do than look at pics online and dig into who likes them then try to dox that person. WTF?????

Fucking heat is no joke this year man. 27 days of over 100 now and no rain. Usually 106 and it's just brutal. Can't do shit outside after 10am. Everything wilted and sun stroked. Just harsh dude. Drinking tons of water and eating very light.
Trying my drinkables every night and man that Dixie is on the nasty side. Decent high but that shit tastes like pure syrup going down.
So far I'd rank Loud and the RWB as the best. Dixie is ok but way too sweet and this other thing I got called Squeeze is a good high but gross and weird to use.
Ya know it's weird. I can hit a 90% THC cart and drink a 100mg bottle of fucker upper juice and it will get me very high, but an old school mid 20ish THC % rolled fatty gets me fucking stoned. Funny how that works.
Anyways...back to the grind.
Have a great weekend and good luck to you in the pool too! I got the 3 and he's more desperate than a 40 year old virgin right now so maybe this week he can help me out a bit.

 

[Stoneyluv]

spray on tanglefoot?!?!?! ooooh it sounds like i could make one hell of a mess with that!!! just spray the grow room walls!!! hahaha

but yeah man that is really saying something you skipping the fair.. you'll save a ton of cash though... and just think you won't have to pay the hotel extra to get the weed smell out!!!! hahahaha still to this day though bro the best one i ever heard was when your wife cleaned the desk thinking there was spilled milk the weed was so rancid smelling!!! i've been trying to find a strain like that ever since!!! ha!

man you got me hungry for lobster rolls,,, last trip i took up north i ate seven of them,,, in only four days!!! so much butter..

the start of the race was pretty exciting, some unexpected teams having troubles... i didn't get to watch the second half from today yet. i'll watch it tomorrow. we had a pretty shitty morning, had to bury a good friend that lost the good fight to cancer last thursday. so by time we got home and then i took care of a few chores i just wasn't feeling it. then a big storm ripped through and knocked the power out anyway so i'm kinda glad i didn't get into the race. power came back on and i checked out the plants and both fans were back on!!

wait till y'all see my plants... cotton tops everywhere!!! must be a hundred of em!!! so i've already decided a few things about the next round. i won't be going back to sip buckets and cages, i've never seen so many buds in my cabinet!!!

i busted out my tea brewer a few days ago, then i remember why i didn't use it more often... i messed up the design and it's painfully slow to empty it out. so i ordered a few new fittings and i'm going to revamp the whole thing and make it better. but the plants got a good watering of compost tea and they loved it!!! i watered em again the next day and had runoff for the first time in the new tray and my boards angling it worked great, all the water ran right to the corner and was super ez to suck up.

i also topped all the containers off with some fertilized soil so they should absorb that in soon too. and i ordered two more fans, i went with the vivosun pretty much came down to $37 vs $55. i needed one more for the flower cab and i needed one for my veg cab because i'm gonna start the next round in a couple weeks.

for some reason i can't post pics so i'll try tomorrow...

stay in the shade brother!!!!!!!!

 

[Bandit420]

spray on tanglefoot?!?!?! ooooh it sounds like i could make one hell of a mess with that!!! just spray the grow room walls!!! hahaha

but yeah man that is really saying something you skipping the fair.. you'll save a ton of cash though... and just think you won't have to pay the hotel extra to get the weed smell out!!!! hahahaha still to this day though bro the best one i ever heard was when your wife cleaned the desk thinking there was spilled milk the weed was so rancid smelling!!! i've been trying to find a strain like that ever since!!! ha!

man you got me hungry for lobster rolls,,, last trip i took up north i ate seven of them,,, in only four days!!! so much butter..

the start of the race was pretty exciting, some unexpected teams having troubles... i didn't get to watch the second half from today yet. i'll watch it tomorrow. we had a pretty shitty morning, had to bury a good friend that lost the good fight to cancer last thursday. so by time we got home and then i took care of a few chores i just wasn't feeling it. then a big storm ripped through and knocked the power out anyway so i'm kinda glad i didn't get into the race. power came back on and i checked out the plants and both fans were back on!!

wait till y'all see my plants... cotton tops everywhere!!! must be a hundred of em!!! so i've already decided a few things about the next round. i won't be going back to sip buckets and cages, i've never seen so many buds in my cabinet!!!

i busted out my tea brewer a few days ago, then i remember why i didn't use it more often... i messed up the design and it's painfully slow to empty it out. so i ordered a few new fittings and i'm going to revamp the whole thing and make it better. but the plants got a good watering of compost tea and they loved it!!! i watered em again the next day and had runoff for the first time in the new tray and my boards angling it worked great, all the water ran right to the corner and was super ez to suck up.

i also topped all the containers off with some fertilized soil so they should absorb that in soon too. and i ordered two more fans, i went with the vivosun pretty much came down to $37 vs $55. i needed one more for the flower cab and i needed one for my veg cab because i'm gonna start the next round in a couple weeks.

for some reason i can't post pics so i'll try tomorrow...

stay in the shade brother!!!!!!!!

Ahh man dang. Sorry for your loss Buddy. Like ol Diesel Farmer used to say, Fuck Cancer.

Yeah it looks like we broke the server. It seems nobody can load pics right now. Hopefully they get it fixed cuz I wanna see that bud porn!!

I won't spoil the race for ya but it was a good one. Well not good for the 14 or the 8 but watching the 8 go behind the wall and cry early was pretty good.
Man I've been on a lobster roll tear since Vegas. Had an awesome one out there and have had one just about every week since. How you like 'em...cold with mayo or warm with butter?
If I make them I actually like a little bit of slaw in there so I go cold with a squirt of lemon or lime and the coleslaw. Yummy! Like if a lobster roll and fish taco had a baby, that's I make. If I add pico de gallo then it's almost like a lobster ceviche roll.

Yep..'nother scorcher today. And it's the first day in full pads