Everything Ninjadip

[Love to grow]

Quality they pricey though compared to the cheapo ones I think I paid 140$ for it

 

[ninjadip]

Ive had the same troubles but the last one I got is an ac infinity new gen s9 one and it seems built for the job way more solid than the shitty spiderfarmer that didn’t even last 1 grow

Yeah it's crazy... The one that crapped was a spider farmer that looked better built than the cheap no name fans i used to order, but lasted less. Still using the free spider farmer light i got for free from sponsor event from old site.

This new one is a vivosun, not expecting much.

 

[Zen_seeker]

Yeah it's crazy... The one that crapped was a spider farmer that looked better built than the cheap no name fans i used to order, but lasted less. Still using the free spider farmer light i got for free from sponsor event from old site.

This new one is a vivosun, not expecting much.

If they are in a tent corner make sure the sides don’t stop the oscillating. I use a spreader, one above and one below, when I use these fans now.

 

[ninjadip]

If they are in a tent corner make sure the sides don’t stop the oscillating. I use a spreader, one above and one below, when I use these fans now.

I got an open box one and the oscillation is already broken lol, so I'm good there

Don't feel like returning it to just fill the landfill up and will use it until it craps out completely

 

[Zen_seeker]

I got an open box one and the oscillation is already broken lol, so I'm good there

Contact them, get a return shipping label. Tell them to send a new one while you use the damaged one.

Don't feel like returning it to just fill the landfill up and will use it until it craps out completely

It won’t go to a land fill normally. It will be fixed or sold with other stuff on a skid at discount most likely.

The spreaders I print are too big to ship to you but they can be made DIY. I’ve seen aluminum ones made from door trim. A coat hanger set. Stuff that has strength enough to push back when forced closed in the corner.

This is how my printed ones look that snap onto the back of the corner poles.

 

[Zen_seeker]

Contact them, get a return shipping label. Tell them to send a new one while you use the damaged one.


It won’t go to a land fill normally. It will be fixed or sold with other stuff on a skid at discount most likely.

The spreaders I print are too big to ship to you but they can be made DIY. I’ve seen aluminum ones made from door trim. A coat hanger set. Stuff that has strength enough to push back when forced closed in the corner.

This is how my printed ones look that snap onto the back of the corner poles. View attachment 135905

I’ve been looking for a DIY wooden one I was going to make before my son got the printer. No luck finding it yet. If I do I’ll post it. They make a huge difference when humidity is high and the sides suck in at lights out. (We leave the doors open at lights on 90% of the time.)

IIRC it used two paint sticks as the flex arms and metal two hole pipe clips to hold them. Simple and easy. They make bigger, stronger, stir sticks for the 5 gallon buckets. You can usually get them free from hardware stores.


I couldn’t find my old link but AI added a few.

A few easy DIY versions:

• PVC elbow spacer: short pieces of PVC into a 90° elbow, then zip-tie or bolt it to the frame. Cheap and easy to tune.
• Wood triangle spacer: a small triangular block or two slats in an L shape. Stronger than stir sticks.
• Flat bar + angle bracket: aluminum flat bar with a small L-bracket at the end; very slim if space is tight.
• Hose clamp + spacer block: clamp a wood/rubber block to the pole to act as a stop.
• Bungee limiter: a short bungee or paracord between two frame points to stop the wall from coming in too far.
• 3D-printed spacer: if you have access to a printer, print a clip-on stop with a padded contact face.

Best simple option besides your stir-stick idea: PVC or wood L-bracket with foam padding. It’s rigid, cheap, and easy to adjust.

If you want, I can give you the easiest 3 designs ranked by cost, strength, and ease of making.

 

[ninjadip]

 

[Zen_seeker]

Nice!

 

[ninjadip]

Nice!

Sorry about the commentary, was right after i took my first bong hit of the day coming home from work

 

[Zen_seeker]

Sorry about the commentary, was right after i took my first bong hit of the day coming home from work

I do it too sometimes, I just never end up posting the vids.

 

[ninjadip]

Got the bicycle back on the road! I'm back baby!
Trying my best to stay active as i get older

Two new wheels, tubes, and tires to replace 30 year old rims from lack of tension and the broken sproke

 

[ninjadip]

Omg... Just did the stage 2 tune now that the mini is running good.. like fucking night and day ..

I'm actually scared of the 20+ psi overboost on the stock turbo

One of the best things for the cars longevity is the add on tune option of lowering the thermostat open temp from OEM 220f down to a normal 185.

It's funny how life sometimes just works out... A few months ago i wasn't sure, and then everything is aligned, even got some bj action from the wife last night, it's all a goddamn miracle and I'm thankful to be alive!!

Now I'm scootin and gettin!!


Add ons include, over boost on sport mode and lowering of thermostat opening from 220 to 185

Edit, this the only remote tune available, same gains, but no shipping ECU for a bench tune, which used to be the only option, if your ecu is damaged in shipping you are bricked from your car due to the immobilizer security, so this was a safe and convenient option, same price, but this guy actually has huge huge recognition in the mini world, he has records for the highest reliable tunes for the mini

He has custom turbos built for this car that can push it to the limits

 

[ninjadip]

This game is so different

 

[Pipecarver]

Yeah it's crazy... The one that crapped was a spider farmer that looked better built than the cheap no name fans i used to order, but lasted less. Still using the free spider farmer light i got for free from sponsor event from old site.

This new one is a vivosun, not expecting much.

I just received an email from Vivosun advertising their new fans in Canadian Dollars.....that would work out to around $70 Usa. I run mine 24/7 non stop. I've 4 Mars Hydro and 3 Spiderfarmer 2 Mars no longer osculate but they all still work. I almost bit on 2 more just in case, I've a lot of humidity in my tent now and the 5 fans I'm using are all that's preventing moisture build up

 

[ninjadip]

I just received an email from Vivosun advertising their new fans in Canadian Dollars.....that would work out to around $70 Usa. I run mine 24/7 non stop. I've 4 Mars Hydro and 3 Spiderfarmer 2 Mars no longer osculate but they all still work. I almost bit on 2 more just in case, I've a lot of humidity in my tent now and the 5 fans I'm using are all that's preventing moisture build upView attachment 136069

I just got one of those for $20 on Amazon but not the smart control ones, just basic plug in on/off. Seems like a good build, but that's fooled me before

 

[ninjadip]

Bicycle upgrade, getting ready for the big event next month, testing with the race map which is an event 45 minutes away, so that's why the GPS says the turn is so far lol

Love the stem mount, I'm a minimalistic guy and wanted someone small for the bike. I don't need a 4"screen, just summertime to tell me when to turn and the street layout so i get the right street in a busy city.

Long story short, i took a wrong turn last event and water 35 minutes back tracking once i realized it

 

[ninjadip]

Man she's getting pretty for something lol

Going to chop this weekend even though i could go one more maybe

 

[Stoneyluv]

she looks sexy AF man!!!!!!!! i can almost smell her from here!!!

and so awesome your seal has been holding oil!! extra added boost and a hummer all in one day!!!! a guys dream right there!! haha

a good warm up and cool down on that turbo and it will last no problem!! thats the one great thing about living on a long dirt road, i always get proper warm up and cool down on vehicles!!

good luck on the harvest this weekend!!!