Evergreen Gardens...PNW

All taped up and ready! I haven't ran the d-huey for a few daze, RH has been reasonable with the lights on, and then shoots up to the 60s low 60s the lights out, fine right now. I'd like to be in the 45s.....see how it goes...
20251115_205527.jpg
20251115_205451.jpg
20251116_063258.jpg

Hopefully it works without messing up the roof...✌️
 

Attachments

  • 20251116_063258.jpg
    20251116_063258.jpg
    629 KB · Views: 3
Day 42........;toke......;hd...... Everything is full tilt..............
20251121_221118.jpg
I'm pretty pumped about this one.... I'm able to run three feeds off of one res... I'm just been adding new solution to the res each time (3gl).
I've been setting it to the recommendations being that I do not know this nutrient line I figured it's best just to follow at some guideline until I can get a wrap around this. So I've been doing about 20 gallons fresh solution PPM is around 1100 at change, they eat then it comes back low numbers so I add new solution to bring it back up to at least 800-1000, it only gains a little.. maybe 200-300 and it stables out so for now that's what I've been doing....

When I get out of this fox farm media it'll all change again.....
.
.
.
🔥
20251121_195746.jpg
Gotta talk about the 820 side for a minute.....🏴‍☠️
20251120_195903.jpg
All this side has gotten is Neptune's harvest Rose & flowering.... And some plant enzymes that came with Humboldt secrets nutrients figure it wouldn't hurt other than that that is it... However at 6 weeks I would think I'd have a little bit more weight in the flower department
Have not top watered at all! Just mist the top inches every by-weekly
20251121_190728.jpg
Couple of snapshots before the light came on that side......got some trichomes....
20251120_195713.jpg20251120_195658.jpg
And after. Light on......SUPER BOOF 42 DaZe......;bo
20251120_201248.jpg
Light is at Full Power @ 25ish inch away just under 1kpar.....
20251120_201057.jpg
;gr.....alright....550 & ion3.....side!!!!!!
The site is really loud........ And stuff sticks to me......🤨

I think it's Vortex, can't remember on this one ....yeah it's Vortex......
20251120_201057.jpg

This is not Vortex 🙃......... Purple diesel Haze........20251120_201151.jpg
🔥
PNW CHERRIES.........20251120_201937.jpg20251121_195746.jpg20251120_201915.jpg

Purple Diesel Haze.............
20251119_200841(0).jpg

Other news..... Looking pretty good hand......
20251119_141557.jpg
Some one to run these.....
20251121_154858.jpg
Home Depot took a shit in my downstairs. ... Killer deals right now.....
My new best friend....
20251120_160533.jpg
.
And fking plumbing.......... Fucking sensors......20251119_141518.jpg

I'm working night shift I got mice in my God damn shop...... That's a problem that cannot go on.........

Alright that's about it......
 
Last edited:
Day 42........;toke......;hd...... Everything is full tilt..............
View attachment 118828
I'm pretty pumped about this one.... I'm able to run three feeds off of one res... I'm just been adding new solution to the res each time (3gl).
I've been setting it to the recommendations being that I do not know this nutrient line I figured it's best just to follow at some guideline until I can get a wrap around this. So I've been doing about 20 gallons fresh solution PPM is around 1100 at change, they eat then it comes back low numbers so I add new solution to bring it back up to at least 800-1000, it only gains a little.. maybe 200-300 and it stables out so for now that's what I've been doing....

When I get out of this fox farm media it'll all change again.....
.
.
.
🔥
View attachment 118826
Gotta talk about the 820 side for a minute.....🏴‍☠️
View attachment 118832
All this side has gotten is Neptune's harvest Rose & flowering.... And some plant enzymes that came with Humboldt secrets nutrients figure it wouldn't hurt other than that that is it... However at 6 weeks I would think I'd have a little bit more weight in the flower department
Have not top watered at all! Just mist the top inches every by-weekly
View attachment 118831
Couple of snapshots before the light came on that side......got some trichomes....
View attachment 118830View attachment 118829
And after. Light on......SUPER BOOF 42 DaZe......;bo
View attachment 118835
Light is at Full Power @ 25ish inch away just under 1kpar.....
View attachment 118827
;gr.....alright....550 & ion3.....side!!!!!!
The site is really loud........ And stuff sticks to me......🤨

I think it's Vortex, can't remember on this one ....yeah it's Vortex......
View attachment 118827

This is not Vortex 🙃......... Purple diesel Haze........View attachment 118834
🔥
PNW CHERRIES.........View attachment 118833View attachment 118826View attachment 118825

Purple Diesel Haze.............
View attachment 118836

Other news..... Looking pretty good hand......
View attachment 118837
Some one to run these.....
View attachment 118838
Home Depot took a shit in my downstairs. ... Killer deals right now.....
My new best friend....
View attachment 118839
.
And fking plumbing.......... Fucking sensors......View attachment 118840

I'm working night shift I got mice in my God damn shop...... That's a problem that cannot go on.........

Alright that's about it......
Fucking gorgeous
 
Morning ☕🏴‍☠️.... Dripping.......
20251114_061232.jpg
Double damn there @doublej! Catching up and everything looks sooooo very amazing. My eyeballs are salivating.
20251120_201057.jpg

;gr.....alright....550 & ion3.....side!!!!!!
The site is really loud........ And stuff sticks to me......🤨
Ha! Sounds like a good "problem" to have.
And after. Light on......SUPER BOOF 42 DaZe......;bo
20251120_201248.jpg
Had to stop myself from quoting every image. Shit was getting ridiculous. I'd be so thrilled to have a single plant in my tent looking as nice as any of these. Thanks for sharing and good luck with the construction and the mouse hunt.
 
Double damn there @doublej! Catching up and everything looks sooooo very amazing. My eyeballs are salivating.

Ha! Sounds like a good "problem" to have.

Had to stop myself from quoting every image. Shit was getting ridiculous. I'd be so thrilled to have a single plant in my tent looking as nice as any of these. Thanks for sharing and good luck with the construction and the mouse hunt.
Thanks Bob.....👊

Not bad for being rusty, this is only the second run off the couch in about 10 years, and I'm doing a bunch of stuff that I didn't think I could do before.
I'm trying to wrangle this environment has been a chore, especially this grow, this grow has been very "Hands-On" .
And it hasn't been cheap either!
The price on these nutrients is 'bsbutton

The waste on this is unbelievable..... To get the ratios in the volumes and the ppms and the fucking the way the wind's blowing all to work...hell idk.... I'm just reading the label to get through it and figure it out.

I've narrowed it down to two or three main players in this nutrient line, in other words I realized what I'm going through the fastest what I need to replace and what I don't need to replace if I am to stay with this nutrient line.

It's all going to change when I jump out of this media and into a inherit media, so I'm hoping I don't go through as much nutrients without actually having to use them and only having to use them for a volume effect.

Seems to me like I have to keep the volume in the res up in order to keep the numbers and check at least with this run is what I'm seeing with my short hydroponic experience....

Hydroponics doubled all my shit!!!!!!
20251123_195419.jpg

Not pictured is a second reservoir that I'm going to use for alternating waterings........ Little late but that's all right I can finish it out that way... I don't like giving them that strong thick nute mix every time

💣
🔥
🚀
More in-House genetics coming to my house.......
Screenshot_20251123_144455_Gmail.jpg
I know it's expensive it's all right it's only money can't take it with it

;pirate
 
i bet those tools were freakin expensive too man... i know how that can get!!!!!

pretty awesome playground you have going on there man!!!!!!!! can't wait to see how it all comes together!!!
 
i bet those tools were freakin expensive too man... i know how that can get!!!!!

pretty awesome playground you have going on there man!!!!!!!! can't wait to see how it all comes together!!!
Man those tools.....it was a toss up between air or battery. I've got a couple other renovation projects after this one so either way it's an investment I was going to need tools regardless.
I just got a little 5 gallon pancake compressor. So that was going to have to be upgraded new airline, it's pretty old.

Some of those deals were unreal if you're in the market for tools and there still is some good deals...

I think all that DeWalt stuff that whole kit was was just under 300 bucks I think for a drill driver a impact and multi-tool 3 batteries and a charger Plus the leaf blower was free with that purchase i can't remember if it was 299 or 399.

Same thing with the Milwaukee stuff.... Not quite as good a deal as I think the dewalts have but nonetheless.
I needed the framing nailer.... I need batteries to go with it... Blue bars out of batteries you got a free jigsaw or your choice of multiple choice tools...

The Palm nailer will come in handy all over the house. And of course it takes its own kind of battery so there's the charger and a battery in a free battery or some shit.....

1500 for all that, I'm not happy about it and now I got to build a fucking deck.. it'll be fun never done anything this big before solo... Well the Solo YouTube........ hehehe...
 
Well, you may be figuring and tuning things, but your plants sure seem to like what you're doing. Hope everything clicks and it ends up being easy to dial in and cut out the nutrient waste when you move to whichever inert media you decide to go with.

You said you already have future needs for the new tools. I'll bet the known work and all of the unforeseen uses that are sure to come will more than justify the investment in short order. Especially at the sale prices you shared. Good stuff.

Have you ever tried anything from Dirty Bird Genetics? I noticed the freebie. The order looks like it'll be a surprise pack that you won't know the strain until the package gets delivered. I've eyeballed some of their stuff in the past. Pretty sure they're in Maine or somewhere in the NorthEast. I read somewhere that they have some genetics that handle humidity well and are pretty resistant to PM. A grow shop about an hour from me had a few packs of their seeds, but not what I was shopping for at the time. Guy working the shop told me their plants do well in outdoor grows in our area. I need to look into them a little more or find someone who has experience with them.
 
Well, you may be figuring and tuning things, but your plants sure seem to like what you're doing. Hope everything clicks and it ends up being easy to dial in and cut out the nutrient waste when you move to whichever inert media you decide to go with.
Thanks Buddy.... some of the waste is part of it starting out I suppose to some extent, I've developed a little routine here where it really hasn't bite me in the ass...6-7 daze - 2-3 floods...if I keep the level up to 20 gallons with fresh water/nutes and get 2 floods in 6 daze I can be okay with that..... Don't want to let it get too low I don't want to dry out my pumps
You said you already have future needs for the new tools. I'll bet the known work and all of the unforeseen uses that are sure to come will more than justify the investment in short order. Especially at the sale prices you shared. Good stuff.
Two bathrooms, one deck if you count this, all projects coming up...oh and a grow room to expand....
Have you ever tried anything from Dirty Bird Genetics? I noticed the freebie. The order looks like it'll be a surprise pack that you won't know the strain until the package gets delivered. I've eyeballed some of their stuff in the past. Pretty sure they're in Maine or somewhere in the NorthEast. I read somewhere that they have some genetics that handle humidity well and are pretty resistant to PM. A grow shop about an hour from me had a few packs of their seeds, but not what I was shopping for at the time. Guy working the shop told me their plants do well in outdoor grows in our area. I need to look into them a little more or find someone who has experience with them.
Nope, I've heard of them. Never saw anything I can remember so there's that . ..

Are you talking about in-house or dirty bird for the mold resistance....Yeah I think North Atlantic is in Maine I believe don't quote me on that...

I got tired all this remake and redo of strange permanent marker tinsel toe cap dance purple f****** I don't know....

So I went looking for some Pacific Northwest dank strains and and In house genetics came up, some of their strains I don't even recognize so that's good and if they keep performing like this Pacific Northwest cherries I don't have a problem with it....

Happy dead bird day.........

;gr
 
Last edited:
Back
Top Bottom