What's new

Everything Ninjadip

Zen_seeker said:
Our one plant is really leaning Sativa. From flip we usually go about 90 days.

I top once when they start getting big and usually again before SCROG or trellis. Depends how things go. Only a one gallon pot this time. Usually up pot to a 3G.

View attachment 97555

View attachment 97556

View attachment 97557

Sons first time growing so he’s not doing bad. When the stretch ends we will lollipop more. Trying to keep anything that’s getting light until then.

A few times at harvest I just cut the trunk and flip the table and let it dry in the tent.

Fantastic grow bud. Hope the final weight reflects how good it looks.
Click to expand...
Thanks for sharing! She looks good!

Yeah it looks like I'll need to be more on top of height and branching next go if I'm going to pull it off.


Got to make me a scrog net, PVC and some kind of wire I guess?
 
ninjadip said:
Was just looking ahead and it looks like the next run are sativa.. I don't think I've ever done it. Imagine I just need to flip early AF, and topping and scrogging can limit height, right?
Click to expand...
Keep the light intensity up too and or a higher blue spectrum if you can, in an effort to manipulate elongation, grow it like an indica, short veg time too, similar night/day temperatures
 
ninjadip said:
Thanks for sharing! She looks good!

Yeah it looks like I'll need to be more on top of height and branching next go if I'm going to pull it off.


Got to make me a scrog net, PVC and some kind of wire I guess?
Click to expand...
They are a bit over watered imo. Wrinkles on the leaves. But this is my sons first grow. Mines the healthy hot mess in the 3x1 tent section.

I made a few tables. These ones can fold away, just don’t glue and joints. I also make it so they can stack if the tops get big and heavy. I used nets and shower curtain clips to hold them in place. I suppose you could use ATV nets too, they come with hooks already attached.
 
Zen_seeker said:
They are a bit over watered imo. Wrinkles on the leaves. But this is my sons first grow. Mines the healthy hot mess in the 3x1 tent section.

I made a few tables. These ones can fold away, just don’t glue and joints. I also make it so they can stack if the tops get big and heavy. I used nets and shower curtain clips to hold them in place. I suppose you could use ATV nets too, they come with hooks already attached.
Click to expand...
Hey I don't understand what you mean by, don't glue end joints. You mean to make them so they can fold instead, like a hinge?
What size squares did you do?
 
ninjadip said:
Hey I don't understand what you mean by, don't glue end joints. You mean to make them so they can fold instead, like a hinge?
What size squares did you do?
Click to expand...
All the parts are just held together by friction and the net keeps tension on it so they can’t fall apart.

This lets me move the + parts attached to the legs like a rotating hinge. Offset the legs so they don’t hit each other when folded. Makes it easy to put away flat.

I bought nets from the grow store as I was in a hurry. It’s a bit small for the frame but works.

Keep a main set of legs at whatever hight you usually plan to SCROG at. You can get couplings to add more length if needed later.

I have a table build on here in one of my threads but I can help you if you want. Others do it a little differently too.

Here’s the net I used.
astralgrow.com

Secret Jardin Webit 90 Trellis Netting 3' x 3â

Secret Jardin offers a complete range of web support to hold your plant : the WEBIT.- Made of solid elastic fibre of 3mm of diameter, the Secret jardin WEBIT can be fixed on all tents, with the vertical tubes and allowing your plant to stay up.- If your tent has a space booster – 4 horizontal...
astralgrow.com astralgrow.com
 
ooooooooooooweeee I took some nice ones.
didn't realize if you turn the lights down you can get some sick pics!

Really loving how the white rhino is finishing!!

White Rhino -
1745277190563.png
1745277102177.jpeg1745277119774.jpeg

1745277013125.jpeg
1745277041668.jpeg
1745277086352.jpeg



Banana Blaze
1745276996725.jpeg
 

Attachments

  • 1745276857817.jpeg
    1745276857817.jpeg
    150.4 KB · Views: 1
one more, not the best lighting, but still cool angle
1745277802182.jpegfront one under some red is why the color looks off

Edit, these two colas made it without any support, just silica strong i guess
 
Last edited:
Hey I can't remember, who on here makes their own carts?? I've been looking into presses, thinking
 
ninjadip said:
ooooooooooooweeee I took some nice ones.
didn't realize if you turn the lights down you can get some sick pics!

Really loving how the white rhino is finishing!!

White Rhino -
View attachment 98215
View attachment 98213View attachment 98214

View attachment 98210
View attachment 98211
View attachment 98212



Banana Blaze
View attachment 98209
Click to expand...
Chonkers, I'd try to check the middle for mold just to check, what's ur rh been like

Some really nice looking buds, nice man.
 
I really hope not. I don't suspect any mold, VPD above 1.3.
Got mad constant air flow, for scrubbing and to handle this. At least that was the plan. I have ventilation over kill for a 2x4, 4 & 6" intakes and 6" exhaust. Plus the rh has been low, ane my temps are on the warm side giving high VPD.

Not sure on ppfd, you think I don't have enough power? In hindsight I think I underpowered week 7 or something of flower, I probably added two weeks to it I guess.

I'm almost there, seems like 5-10% amber
 
ninjadip said:
I really hope not. I don't suspect any mold, VPD above 1.3.
Got mad constant air flow, for scrubbing and to handle this. At least that was the plan. I have ventilation over kill for a 2x4, 4 & 6" intakes and 6" exhaust. Plus the rh has been low, ane my temps are on the warm side giving high VPD.

Not sure on ppfd, you think I don't have enough power? In hindsight I think I underpowered week 7 or something of flower, I probably added two weeks to it I guess.
Click to expand...
No, curious if you're giving them too intense or too much light if they are supposed to be ripening and finishing up

ninjadip said:
I'm almost there, seems like 5-10% amber
Click to expand...
 
ninjadip said:
Totally makes sense why they are still going... Feel like an idiot, thanks man!
Click to expand...
Yup, we gotta mimic the seasons, it seems, just how nature does it.

After all, they've been evolving on the same schedules more or less over hundreds of million of years.


On a different note, I suspect we can manipulate plant evolution a lot faster than bigger cellular systems like animals take.


I forget that too sometimes and wondering my plants won't stop throwing out fucking pistils when they should be ripening lol
 
Yeah, thanks again. Been too long, I forgot. I had the light down from 100 to 40 today.
I just turned it completely off, and going to see what just these booster lights do to them by themselves.

I'm getting real antsy lol

PXL_20250425_222900017.jpgPXL_20250425_222922872.jpg
So crazy looking up close.. the lights fuck with you
 
it's time, or close enough!!

My visual assessment of trichomes:
<1% clear
80-85% cloudy
15-20% amber

the conditions are near perfect!


last pics before chop,
1745774817734.jpeg1745774844510.jpeg
1745774996106.jpeg


the detail on this pic below is crazy, the trichomes on the pistols and mostly in focus and amber(look top right in the pic)
1745774871498.jpeg

zero flash/filter/edit
i'm crazy excited to see how the white rhino looks after drying/curing!
1745774778967.jpeg
 
You must log in or register to reply here.

Similar threads

Kuwl
Kuwl...... MH FC 8000 EVO + 6 Plants
2 3
Replies
78
Views
2K
Kuwl
Kuwl
Stoneyluv
  • Question
reliable economic hydro setup for a noob
4 5 6
Replies
151
Views
6K
Stoneyluv
Stoneyluv
E
Ebbnflowr grows The One bx2 and Watermelon Rolex f3 😎
Replies
4
Views
212
ebbnflowr
E
E
First time outdoor grow 2025
Replies
2
Views
896
MiGrampa
MiGrampa
Chemistry
A new dawn.
2 3 4
Replies
116
Views
7K
Chemistry
Chemistry
Back
Top Bottom