smoke

Put the flower from the 4 plants into the vaults to finish the drying and start the cure. Moisture readings are from 66 % to 72%. We will burp them down daily until everything is a stable 62%. Every plant filled at least 1, 21 liter vault plus. (2 lbs+)

Cleaned up the flower room, added water and ph to 5.8. The room still had the roots and water in each module to help add humidity while drying. Roots looked good imo with no rot

20231104_151831.jpg20231104_150756.jpg20231104_151012.jpg20231104_115257.jpg20231104_115342.jpg20231104_115148.jpg20231104_115231.jpg
 
Put the flower from the 4 plants into the vaults to finish the drying and start the cure. Moisture readings are from 66 % to 72%. We will burp them down daily until everything is a stable 62%. Every plant filled at least 1, 21 liter vault plus. (2 lbs+)

Cleaned up the flower room, added water and ph to 5.8. The room still had the roots and water in each module to help add humidity while drying. Roots looked good imo with no rot

View attachment 28327View attachment 28328View attachment 28330View attachment 28335View attachment 28339View attachment 28338View attachment 28337
Beautiful finish man. You are like an ad for Current Culture.
 
Moved the 4 Athens Silver Haze out of the veg room to the flower room, one plant in particular was supported by yo-yo in the veg room, decided to put a cage around her to help. Roots are similar conditions of the AF1 when they were moved over. Post #61 and 62 above.

Still working on getting the AF1 stable at 62% in the vaults.

20231109_111636.jpg20231109_112130.jpg20231109_112235.jpg20231109_112848.jpg20231109_113048.jpg20231109_113944.jpg20231109_114124.jpg20231109_114442.jpg
 
Hey man, it's a lot to ask but do you think your helper could take a video of a walkthu on your space? I'm having trouble visualizing your rooms and layout. Are these rooms on a concrete slab?
I'll put it on her honey do list and see how that goes.

Stay tuned. Lol
 
Hey man, it's a lot to ask but do you think your helper could take a video of a walkthu on your space? I'm having trouble visualizing your rooms and layout. Are these rooms on a concrete slab?
Ok, rooms are built in our 40x80 shed that already had a concrete floor but no plumbing or water in the shed. The shed is split in half with partition wall. Heated with a hot dawg propane heater on the finished half. Shed is 50 ft from the house and septic tank. We added a 2 ft bump out and put all the plumbing and water for the heated bathroom in that bump out.

RO water is made in this bathroom and sent via blue pex tubing through the unheated half in the rafters to the 325 gal storage tank in the heated side where the veg and flwr rooms are built.

20220226_131151.jpg20230613_184851.jpg
View attachment 20231111_090454.mp4
Screenshot_20231113-110630_Video Player.jpg
 
Ok, rooms are built in our 40x80 shed that already had a concrete floor but no plumbing or water in the shed. The shed is split in half with partition wall. Heated with a hot dawg propane heater on the finished half. Shed is 50 ft from the house and septic tank. We added a 2 ft bump out and put all the plumbing and water for the heated bathroom in that bump out.

RO water is made in this bathroom and sent via blue pex tubing through the unheated half in the rafters to the 325 gal storage tank in the heated side where the veg and flwr rooms are built.

View attachment 29930View attachment 29931
View attachment 29932
View attachment 29935
Wow! You aren't messing around!!! 🍻
 
Last edited:
I get it.

So that’s what goes as a shed in those parts huh? That’s even too nice to be called a barn here. That’s a shop if anything.

You make your own power?

Nice that it is all on one level.
Yea its a shop

Nope buy the power. Last bill for house and shop was $480.00 with both rooms running. Just house alone would be about $250.00

Shop floor is actually 17" lower than the patio/house floor where picture was taken
 
Yea its a shop

Nope buy the power. Last bill for house and shop was $480.00 with both rooms running. Just house alone would be about $250.00

Shop floor is actually 17" lower than the patio/house floor where picture was taken
I can say for certain that the pics do not do this place justice. Nicest set up I have ever seen đź‘Š
 
What a great set up~!:love:
You may say you do not know how you do it, but you must have had a clue when you set all that up.:cool:
Any trouble with the water being in the non heated area?
I need to get water to my shop but have no heated area besides the grow room.
 
What a great set up~!:love:
You may say you do not know how you do it, but you must have had a clue when you set all that up.:cool:
Any trouble with the water being in the non heated area?
I need to get water to my shop but have no heated area besides the grow room.
The bathroom where the RO is located 8x16 is heated with a wall mount electric heater. The blue pex leaves the heated bathroom, goes up into the rafters in the unheated area and drops down to fill the water tank. That half the shop is heated. After running the ro system to fill the water tank i blow the line out with air so nothing in the unheated area has water in it.

What would I change? ... the area where the chillers, ballasts, air pumps,75 gallon green tank is gets pretty warm and temperature reaching 95 deg even with fans blowing and a 6" exhaust out the top

Edit; when i say " i don't know how i do it" im referring to running neither " not live or sterile
 
Last edited:
Moved the 4 Athens Silver Haze out of the veg room to the flower room, one plant in particular was supported by yo-yo in the veg room, decided to put a cage around her to help. Roots are similar conditions of the AF1 when they were moved over. Post #61 and 62 above.

Still working on getting the AF1 stable at 62% in the vaults.

View attachment 29490View attachment 29491View attachment 29492View attachment 29493View attachment 29494View attachment 29495View attachment 29496View attachment 29497
Turn and burn man Nice
 
Air force one is dry and stable in the vaults at 62-63 %

Total weight 4 plants. is 4155 gms, we broke the 1/gpw running 4000 wt hps.

I liked this plant, fairly easy to grow, liked more calcium early, then potassium but just kept making these fist size nugs and lots of them.

Biggest plant was 2 lbs 12 oz
 
Air force one is dry and stable in the vaults at 62-63 %

Total weight 4 plants. is 4155 gms, we broke the 1/gpw running 4000 wt hps.

I liked this plant, fairly easy to grow, liked more calcium early, then potassium but just kept making these fist size nugs and lots of them.

Biggest plant was 2 lbs 12 oz
To say well done would be a massive understatement! Congrats to you and your helper đź‘Š
 
To say well done would be a massive understatement! Congrats to you and your helper đź‘Š
Thanks Slg, broke the 1 gpw that @ZombieRider made reference to over in reds thread that got me thinking "how big of a plant is it possible to grow indoors " . 1255gms was the weight. My biggest prior was 2 lbs 8 oz

Old posters on forums led me to Gettogro
 
Thanks Slg, broke the 1 gpw that @ZombieRider made reference to over in reds thread that got me thinking "how big of a plant is it possible to grow indoors " . 1255gms was the weight. My biggest prior was 2 lbs 8 oz

Old posters on forums led me to Gettogro
In the year 2012, this is one of maybe 6 growers that inspired me to hydroponics. I know some here will remember

Post in thread 'New 6 plant Gettotree setup.' https://www.icmag.com/threads/new-6-plant-gettotree-setup.235301/post-7133223
 
Back
Top Bottom