Red's Thread ~ All things Cannabis

[moe.red]

I battle to get out of the car sometimes and can’t move or walk.talk about a sharp pain..those lumber nerves on my lower right side hurt like crazy when my back goes but I’m sure my spines sending those signals like it’s squashing or pinching the nerve in spine…can’t do shit .i couldn’t get off the shitter yesterday .lol.had to slide off the seat onto the floor .

That blows my dude. I had the first shot and thought I was fixed! that lasted about 36 hours and went right back to where I was. I have another shot tomorrow, they are going to target popping the cyst pushing on my spinal cord, and fill the space up with steroids and whatever else they got.

This time for SURE!

Do you have a bulging disk or something? Can’t smoke enough to take that pain away!

 

[moe.red]

Not bad.




All about the same.

Bringing the RDWC online. For those that need a cheap humidifier you could do worse than this

View attachment IMG_5018.mov

 

[Pipecarver]

Hey Moe, did you see my question about low lights effect on Cannabis flowers? Have you played with lighting intensity at all? I'm almost convinced low light = frost ....and smaller buds...any thoughts?

 

[Stoneyluv]

so it looks like you don't even need those plates on the bottom.. jelly for sure!!!!!

 

[moe.red]

Hey Moe, did you see my question about low lights effect on Cannabis flowers? Have you played with lighting intensity at all? I'm almost convinced low light = frost ....and smaller buds...any thoughts?

No sorry missed that. In your pipes and things thread?

 

[moe.red]

so it looks like you don't even need those plates on the bottom.. jelly for sure!!!!!

Not sure yet bro. Let’s give them a little time and compare. Still too early to call imo

 

[steamroller]

No sorry missed that. In your pipes and things thread?

Does low intensity lighting produce frostier buds?

Over my last 2 grows I've grown 2 very frosty girls. Each time I've screwed up by having my lights on in flower at 20-40% intensity through most of their development.The first time I'd turned down my light for pics and forgot to turn it back up from 3 weeks in flower through 7 weeks and the...

budbuilders.org

 

[Max]

That blows my dude. I had the first shot and thought I was fixed! that lasted about 36 hours and went right back to where I was. I have another shot tomorrow, they are going to target popping the cyst pushing on my spinal cord, and fill the space up with steroids and whatever else they got.

This time for SURE!

Do you have a bulging disk or something? Can’t smoke enough to take that pain away!

Uno by the time I get in to get an X-ray done I’m all better lol and they just say your backs fine .itwill b a different this time round as it’s been bad since jan.but I’ve had other Heath probs that I’ve put first.i think your right on what it is or could b a slipped disc as that’s how it feels when it goes.I’ve had this problem long time but seems to take longer now to get better as I get older.it’s faaarked.i hate it.

 

[moe.red]

Uno by the time I get in to get an X-ray done I’m all better lol and they just say your backs fine .itwill b a different this time round as it’s been bad since jan.but I’ve had other Heath probs that I’ve put first.i think your right on what it is or could b a slipped disc as that’s how it feels when it goes.I’ve had this problem long time but seems to take longer now to get better as I get older.it’s faaarked.i hate it.

Unfortunately the only way to really know what is going on is MRI. They didn't even see the cyst pressing on my cord until the MRI.

Any soft tissue stuff gets missed with Xray.

Virtual fist bump man, I know how this shit can take the wind out of your sails.

 

[Max]

I’ll mention that to the doc..I hope they fix you up this time and not make it worse.is this a dangerous procedure moe they are doing near your spinal cord..

 

[moe.red]

Honestly dudes it seems like both methods work. I know sometimes a single tap root is a struggle but even without the plate on the bottom if you plant the right from the vertical germinator I’m getting good results naturally



This one had no plate^^^

And the roots i do have are more than doubling daily. That’s what I want to see at this stage. If I brought the water temp up a little they would grow even faster.

 

[moe.red]

Same plant about 20 hours apart

 

[Stoneyluv]

i wonder if the plate encouraged that early fish bone that one has?

.

did you get another shot today? how ya feelin?

 

[moe.red]

i wonder if the plate encouraged that early fish bone that one has?

.

did you get another shot today? how ya feelin?

Yes I think it did. I’ll have a full accounting across 10+ plants in the next couple of days as I move them into RDWC and we will decide together if it’s worth it. Print only takes 11 minutes so you might give it a try too next round.

Yeah got the shot. They drained the cyst. Hurt like a mother. Sitting here with a heart rate of 110. Just trying to chill.

 

[moe.red]

Someone was asking about nute precipitation due to ph. Here it is

View attachment IMG_5027.mov

View attachment IMG_5030.mov

 

[Stoneyluv]

damn man, not the bliss you had from the first time.. hope you can keep your mind off of it and it calms down for ya!!

 

[Stoneyluv]

Someone was asking about nute precipitation due to ph. Here it is

View attachment 92090

View attachment 92091

so what is the real danger in this? is it that only some of the elements fall and we never really know which ones so the ratios are junk?
or is it just wasting nutes and bad practice?

i guess i'm asking because if it was to happen could we still use it?

 

[moe.red]

so what is the real danger in this? is it that only some of the elements fall and we never really know which ones so the ratios are junk?
or is it just wasting nutes and bad practice?

i guess i'm asking because if it was to happen could we still use it?

It’s the metals. So iron copper etc.

Risk is wasting nutes and imbalances. Once you start down this path you really lose track of what’s in there. The precipitates won’t hurt anything tho just get the ph right and re-add micros. In your case with a single bottle you are pretty much sol.

 

[moe.red]

View attachment IMG_5059.mov
View attachment IMG_5060.mov

 

[Stoneyluv]

View attachment 92858
View attachment 92859

and we're off!!!!!!

what is the HAOG stand for?

do you run your oxygen booster at this age?

 

[moe.red]

and we're off!!!!!!

what is the HAOG stand for?

do you run your oxygen booster at this age?

Hells angels og x chemdawg. Some really og breeder cuts crossed by oldsog. Dude is a legend. I’ve grown this before it’s a crowd pleaser. I’ll be sharing if you are interested.

I’m not doing o2 this run. Everything atmospheric. But yeah if I was doing o2 it would have started from seedling.

I ran into problems with the atlas scientific do probe. Keeps getting fouled with nute build up. Have not come up with a solution yet. So going old school this run. I’m hoping the do probe I shipped you today works better. We can work on that together offline.

All other setpoints are controlled. Not running co2 yet but probably in about a week. I want all of them fully rooted and reaching water before I start to ramp things up. Had to put the mini split on heat mode. Res temp is a bit low for my liking at 67 but the chiller isn’t even on. Hopefully it heats up now that the heat is on and the tent is closed.

I’m really happy with the roots on all of them even without the plates. But I do think the plates on the bottom did help with branching on the ones that had them. Time will tell as these things get big.

The goal is to get down to the best 8 plants by the switch but honestly all 12 look like keepers. 12 is just too much for this space with the growth rates I typically get. With 8 it will still be a jungle. I’m going to flip early and try to keep things manageable.

 

[Observer]

when Fog - seed - harvest grow? or clone

 

[moe.red]

when Fog - seed - harvest grow? or clone

Sorry not sure I understand

This is fem seeds started in vertical germinator to fog cloner to RDWC. Is that the question?

 

[Observer]

Sorry not sure I understand

This is fem seeds started in vertical germinator to fog cloner to RDWC. Is that the question?

growing to harvest in the fog, with the fog, as one with the fog.

lol

 

[Observer]

Sorry not sure I understand

This is fem seeds started in vertical germinator to fog cloner to RDWC. Is that the question?

growing them till harvest in the fog cloner.

 

[Aqua Man]

Someone was asking about nute precipitation due to ph. Here it is

View attachment 92090

View attachment 92091

This should be pinned somewhere brother. Very important for new growers to understand. Fucking beautiful example

 

[moe.red]

growing them till harvest in the fog cloner.

I suppose if I wanted a couple grams per plant and did bonsai. No friggin way 15 plants will fit in there until flower. Even with just 1 the roots would get all caught up in the fan and other hardware.

I’m sure you would find a way to make it work tho.

For me I’ll stick to the 4x8 fog tent with the 4 55 gallon totes to flower in via fog. Leave the cloner to be a cloner/seedling starter.


That’s a proper fog flower setup

 

[moe.red]

This should be pinned somewhere brother. Very important for new growers to understand. Fucking beautiful example

I’m trying to teach my kid how to hydro so I can hand over the reigns to him. Having 2 people makes it easier to get pics and video. Trying to grab all these little training tidbits as we go and I’ll eventually put them all together in a hydro A to Z for beginners kinda thread. Right now we are focused on bennies establishment.

Doing stuff on the bench always made it more understandable to me but hardly anyone bothers. Hard to believe but I have never seen that experiment posted before. Once you see it with your own eyes it tends to get locked in better than just reading about it.