What's new

Scotty's 2nd Run

Hey everybody just checking back in. Been really busy so haven't had much time to post. Literally in the process of harvesting the flower tent with 5 babies ready to move in as soon as I get the remaining two chopped. I didn't take many pictures, but the 2 that are still in the tent waiting to get chopped turned out really pretty. I'll try to al least post some final pictures after everything gets trimmed, but here's what's in the big tent currently.
20241209_145057.jpg20241209_145046.jpg
 
What strains you got goin there dude 🧐
 
Rootsruler said:
WOW! Absolutely beautiful!

POTM material...........
Click to expand...
Thanks!! They just developed this beautiful fade, I especially love the deep purple on yellow. It's almost a shame to have to chop them.....almost 🤣
 
CannaGranny said:
Welcome back @Scotty 420 !
Click to expand...
Thanks CG, actually I'm probably going to have to hit you up for some seeds soon. As it appears my Greenpoint source may have gone down hill (and I checked yesterday & they weren't doing RA's anymore, I'm definitely not paying full price 🤣) But honestly I was looking for some variety anyway GP crossing everything to the same 2 plants is far from ideal, toward the end I was hunting RA's that were crossed with anything else.
 
Scotty 420 said:
Those 2 are actually Ponderosa Cookies, I also had Coffee Crisps in there but they all got the 🪓 a couple days ago.
Click to expand...
The coffee crisp I been running is fire dude hell yea....the plants look good too. Im sure you'll enjoy the coffee crisps....mine is that burnt rubber smell on the plant and that classic vanilla cocoa gas taste we all like
 
Another totally random update. Finally got everything trimmed & bagged, didn't really get many pics, here are the Ponderosa cookies drying.

20241228_124628.jpg20241228_124514.jpg20241228_124356.jpg

Got the babies up potted & moved into the flower tent. I ended up buying some LST clips that I used to keep a big stretcher from hitting the lights so I'm trying to implement them earlier now to try to open up the plants a bit more & see if I can get a decent increase in yield. (1st pic is about a week ago other 2 are yesterday)

20241228_124218.jpg20250111_191722.jpg20250111_191746.jpg

Finally got this from my wife this morning, it's a SS one of our friends sent over from their son's (who also happens to be my sons best friend) phone from my 11 year old son.

IMG_20250113_173432.jpg

Fortunately these people are cool, he grows himself & they both smoke, he even works at a grow op. So could have been a lot worse, but we're going to have to have a talk when I get home tonight, should be fun, lol.
 
Scotty 420 said:
Another totally random update. Finally got everything trimmed & bagged, didn't really get many pics, here are the Ponderosa cookies drying.

View attachment 86578View attachment 86579View attachment 86580

Got the babies up potted & moved into the flower tent. I ended up buying some LST clips that I used to keep a big stretcher from hitting the lights so I'm trying to implement them earlier now to try to open up the plants a bit more & see if I can get a decent increase in yield. (1st pic is about a week ago other 2 are yesterday)

View attachment 86581View attachment 86582View attachment 86583

Finally got this from my wife this morning, it's a SS one of our friends sent over from their son's (who also happens to be my sons best friend) phone from my 11 year old son.

View attachment 86584

Fortunately these people are cool, he grows himself & they both smoke, he even works at a grow op. So could have been a lot worse, but we're going to have to have a talk when I get home tonight, should be fun, lol.
Click to expand...
Had that talk with my stepson it was short and sweet here's a redacted version
ddt-wrestling.gif
 
MDK said:
Had that talk with my stepson it was short and sweet here's a redacted version
View attachment 86593
Click to expand...
Yeah was thinking something like this:
the-rock-shut-up.gif

:ROFLMAO:
 
Quick update while I'm not busy at work. All the plants are looking pretty good, just finished their 2nd feeding, thinking we're going to flip pretty soon. Per the CG method I need to do a tea before I flip, which I try not to do with a feed. So thinking when they are ready for water next time we'll do the tea & flip roughly a week later.
20250120_173401.jpg20250120_173336.jpg

On a personal note since I put my son on blast last week I gotta give him some props today. Not only was he on the principals honor roll (meaning all A's not even any A-'s) they also gave all the kids a reading test at school, basically studies their ability to read a passage & retain information & grasp certain information within the text. So my son literally maxed out the test score. He's in 5th grade & they say he's reading at over a 10th grade level. The test was based on a rating called a lexile rating 1300 is considered college/career ready reading level he scored 1400 & he may have been able to do better as the test they gave him maxed out at 1400.
IMG_20250121_100638.jpg
 
Scotty 420 said:
Quick update while I'm not busy at work. All the plants are looking pretty good, just finished their 2nd feeding, thinking we're going to flip pretty soon. Per the CG method I need to do a tea before I flip, which I try not to do with a feed. So thinking when they are ready for water next time we'll do the tea & flip roughly a week later.
View attachment 87427View attachment 87428

On a personal note since I put my son on blast last week I gotta give him some props today. Not only was he on the principals honor roll (meaning all A's not even any A-'s) they also gave all the kids a reading test at school, basically studies their ability to read a passage & retain information & grasp certain information within the text. So my son literally maxed out the test score. He's in 5th grade & they say he's reading at over a 10th grade level. The test was based on a rating called a lexile rating 1300 is considered college/career ready reading level he scored 1400 & he may have been able to do better as the test they gave him maxed out at 1400.
View attachment 87429
Click to expand...
That's awesome!

I'm trying to resist but screw it. What happened that he got put on blast?
 
Rootsruler said:
That's awesome!

I'm trying to resist but screw it. What happened that he got put on blast?
Click to expand...
It's in my last update, but basically he texted one of his friends telling him that I was growing weed. The other kids parents of course saw it, fortunately they already knew I grew weed & they're also growing weed at their house so it wasn't all that bad but we had to have a talk.
 
Congrats on your boy~!
Seemed like he was well aware of his environment before the test.
Kids are often more aware than we think.
 
Another quick update, nothing really major going on plant wise. Getting ready to flip in a couple days, really need to get in & do a bit of defoliation as they're getting a bit "bushy". Other than that everyone seems happy & healthy.
20250129_174436.jpg20250129_174535.jpg

On a personal note my drier broke yesterday. Granted I work in a somewhat related field but driers are definitely not my specialty. However I was able to get it diagnosed (bad heat element) & found a replacement on Amazon for less than $15 which is supposed to be here tomorrow. We were looking at paying minimally several hundred dollars to get it repaired & were even looking at replacing it which would have been close to $1,000. So if I can get by with a $15 repair I'm going to call that a huge win. (and then use the savings as a justification to spend money on a new vape lol)
 
Scotty 420 said:
Another quick update, nothing really major going on plant wise. Getting ready to flip in a couple days, really need to get in & do a bit of defoliation as they're getting a bit "bushy". Other than that everyone seems happy & healthy.
View attachment 88260View attachment 88261

On a personal note my drier broke yesterday. Granted I work in a somewhat related field but driers are definitely not my specialty. However I was able to get it diagnosed (bad heat element) & found a replacement on Amazon for less than $15 which is supposed to be here tomorrow. We were looking at paying minimally several hundred dollars to get it repaired & were even looking at replacing it which would have been close to $1,000. So if I can get by with a $15 repair I'm going to call that a huge win. (and then use the savings as a justification to spend money on a new vape lol)
Click to expand...
I have a similar story with a customer of mine. She had a small casita at the back of her property that she rents out for short term stays. She had a leak in one of the showers that 3 plumbers couldn't find the issue without breaking up all the expensive marble work and she had to turn off the water supply to the entire casita. All 3 wanted to open up the valve area to see what the problem was and then go from there. Minimum charge for something like that would've been around $2000 not including the tile work that would have to be done to close it up. The tile work was original so she wanted as little tile removal as possible meaning a lot of time and care to not damage the tile around the ones that needed to be removed for valve access. All 3 plumbers told her that it was probably a cracked valve body. I told her before we go demoing a bunch of stuff before we know what's wrong we should start with the easiest and cheapest solution first to see if that will fix the problem so I removed the valve stem where the water was leaking and rebuilt all the seals. Put it back in, turned on the water and........no leak. Charged her $250 and earned a customer for life.
 
Rootsruler said:
I have a similar story with a customer of mine. She had a small casita at the back of her property that she rents out for short term stays. She had a leak in one of the showers that 3 plumbers couldn't find the issue without breaking up all the expensive marble work and she had to turn off the water supply to the entire casita. All 3 wanted to open up the valve area to see what the problem was and then go from there. Minimum charge for something like that would've been around $2000 not including the tile work that would have to be done to close it up. The tile work was original so she wanted as little tile removal as possible meaning a lot of time and care to not damage the tile around the ones that needed to be removed for valve access. All 3 plumbers told her that it was probably a cracked valve body. I told her before we go demoing a bunch of stuff before we know what's wrong we should start with the easiest and cheapest solution first to see if that will fix the problem so I removed the valve stem where the water was leaking and rebuilt all the seals. Put it back in, turned on the water and........no leak. Charged her $250 and earned a customer for life.
Click to expand...
Yeah it's funny how some people default to the worse case scenario. Just start with the simplest possibility & work your way out. I looked up a youtube video on it before I started working & they were calling for removing the entire front of the machine & removing the entire drum to replace the element. The wife & I were burning one before I got started & told her that if the elements out I'm not tackling removing the entire drum. However after opening it up from the back I had all the access I needed to test & once I discovered the element to be the issue I saw that the entire housing was just held in by one screw & I could easily just unhook one wire & it was easy to pull the entire assembly out the back of the machine & work on it.

So at this point the wife was prepared to have to spend serious money on this thing when I come in & tell her I can have it up & running in a couple days with a $15 dollar part I'm basically a hero at that point 🤣
 
CannaGranny said:
Looking loverly! 🥰
Now, if I could just get ya to scrog!
Click to expand...
Thanks!! Yeah I really should give scroging a go. I have access to PVC pipe & fittings at wholesale so making the table should be relatively cheap. Maybe we'll try to get that up for the next round. I basically just need to make a frame the rough dimensions of my tent with a grid of string. Then put it on legs that would hold it up a certain amount over the tops of the pots, correct? Then once the plants get over said height just smash the grid down over the plants & let them grow through?
 
Scotty 420 said:
Yeah it's funny how some people default to the worse case scenario. Just start with the simplest possibility & work your way out. I looked up a youtube video on it before I started working & they were calling for removing the entire front of the machine & removing the entire drum to replace the element. The wife & I were burning one before I got started & told her that if the elements out I'm not tackling removing the entire drum. However after opening it up from the back I had all the access I needed to test & once I discovered the element to be the issue I saw that the entire housing was just held in by one screw & I could easily just unhook one wire & it was easy to pull the entire assembly out the back of the machine & work on it.

So at this point the wife was prepared to have to spend serious money on this thing when I come in & tell her I can have it up & running in a couple days with a $15 dollar part I'm basically a hero at that point 🤣
Click to expand...
You need to tell the wife that you want to bank that money into your weed gear fund....heh, heh, heh.....🤑
 
Scotty 420 said:
Thanks!! Yeah I really should give scroging a go. I have access to PVC pipe & fittings at wholesale so making the table should be relatively cheap. Maybe we'll try to get that up for the next round. I basically just need to make a frame the rough dimensions of my tent with a grid of string. Then put it on legs that would hold it up a certain amount over the tops of the pots, correct? Then once the plants get over said height just smash the grid down over the plants & let them grow through?
Click to expand...
 
Rootsruler said:
You need to tell the wife that you want to bank that money into your weed gear fund....heh, heh, heh.....🤑
Click to expand...
LOL, I'm one step ahead of you, just ordered a new dry herb vape. I also ended up getting a nice commission check from work so I was even able to splurge & spend a little more than I originally planned & ended up going with the PotV Lobo. Also big thanks to @thisguyvapes for sharing his vast knowledge on the subject & linking me to his really cool website where I found the nice upgrade option. If you're in the market for a vape of any kind check out his site here.

I guess I kinda buried the lead there, the drier fix was successful. Back up & running for $15. Also just flipped over to 12/12 in the flower tent & did a major defoliation last night. Didn't get any post defol pictures & their still sleeping right now, but I'll try to get some pics this afternoon & update.
 
I've been a litle busy the last few days so I just wanted to give you all an update. Plants are still cruising along they just got fed yesterday & we're starting to se some flowers. It's kinda funny though the way plants work because all the ones with flowers are the same strain (Grape Jelly) & all the Purple Crunches are lagging a bit behind. They're getting there throwing pistils & all that, but just behind the others. Amazing how genetics work.
20250213_230608.jpg20250213_230454.jpg20250213_230426.jpg

So I had a bunch of trim lying around (like 2 or 3 runs worth so like 10-15 plants) & decided to finally do something with it. So I ran to the store & got some everclear & am working on some green dragon. It's been doing it's thing for about a week. Figure I'll give it until the end of the month & then start evaporating it down. Never really done this before so not exactly sure how I'm going to do it. I'm considering just setting it by a window in the basement slightly opening it & just letting a fan blow over it out the window. Or maybe use a crock pot full of water like a double boiler to speed up the process. And I'm also considering moving the whole thing to the garage (which is left open all the time when someone is there except when we're sleeping) which would be better ventilated. I know the fumes are dangerous so I just want to make sure I don't blow up my house. LOL

I filled a pretty big mason jar as full as I could but I still had quite a bit of trim left so I decided to make some canna coconut oil. This is a process I've done many times before so a bit less adventurous than the green dragon experiment, but I decided to do something different with the oil this time. Usually I just end up making it into brownies, but I really don't like having to eat a whole brownie (and I actually try to dose them heavy & cut the brownies up really small) or multiples if you really want to feel it. So I decided to try to do capsules, so we can just pop a pill or 2 and move on. Honestly I thin it turned out awesome. I have 100 (well probably like 95 by now LOL) pills ready to go & a shitload or leftover oil to fill more later.
20250213_230308.jpg20250213_230138.jpg

Finally obviously today is Valentines Day so we had to make a box for our sons school party. On a somewhat bitter-sweet note this will actually be the last box we have to make as our son is moving onto middle school next year where they no longer do class parties. I will say we tend to do it up big for the V-Day boxes so again it's almost sad that it's the last one, but also nice that I won't have to deal with it again. Here's what we ended up with & I'll try to dig out a couple pictures of my some of the older ones we've done just to show off how into it we tend to get.
20250214_013354.jpgIMG_20170213_134605294.jpgIMG_20180208_211235605.jpg
 
You must log in or register to reply here.

Similar threads

SpectrumFarms
SF's, Couldn't be patient grow!
2
Replies
50
Views
2K
SpectrumFarms
SpectrumFarms
GrumpAzz
Grump's Dip-N-Stix Grow 🌱
12 13 14
Replies
414
Views
13K
SSgrower
SSgrower
Skinnypuppy80
Newbs 1st grow! Complete failure or a "by the skin of my teeth" documentary 🤔🫣
2 3
Replies
81
Views
2K
Aqua Man
Aqua Man
GrumpAzz
Grump's Power Plant Grow.
9 10 11
Replies
327
Views
13K
GoodShit97
GoodShit97
GrumpAzz
Grump's Greezy Grow 🌱
2 3
Replies
73
Views
2K
Bandit420
Bandit420
Back
Top Bottom