Red's Thread ~ All things Cannabis

[Observer]

Well, here’s what I’m gonna do.

4 strains. All fem

Vert Germ and put in fog cloner.
O2 that shit up.
Pick the best of each strain. Those are moms.
Snip snip. Enough to share. Root them out again with o2.
Put them in the fog tent. 8 total. And guess what? O2 those also. I’m predictable.

Time permitting I’ll tissue culture these moms just in case I hit the pheno jackpot

Then repeat in the other tent.

So yeah co2 up top and o2 below as soon as they can use it.

O2 for breakfast lunch and dinner

 

[moe.red]

O2 for breakfast lunch and dinner

No reason not to.

 

[Zen_seeker]

So, been a minute.

Basement has been mothballed for damn near a year. Not gonna whine about it, just life.

That said,

View attachment 80598

Time to start growing again.

Thanksgiving means I have 4 days off to mess around with getting things ready. Last time I grew I killed my O2 concentrator due to use. So I just bought this one

View attachment 80600

which does 93% at 5L/m sustained. That should do it. If you want to see how an engineer with no chill abuses plants, here's your spot. I'm going to try really hard to do updates every weekend.

Happy holidays everyone.

Nice to see you back and swinging.

 

[moe.red]

Weekend update

Seeds selected, plan in place


Germination stabilization and sterilization no seeds yet until I get it dialed in. Basement is cold



Fog cloner tent cleaned up currently running bleach in the water and stabilizing environment



Fog flower needs work getting it all assembled and tested



Now I’m gonna try to dry out this sieve from the small O2 concentrator. First gentle but if it resists it gets the vacuum oven treatment tomorrow. I’d like to have 2 working machines for what’s coming.

 

[Stoneyluv]

hells yeah!!!!!!!! awesome Moe!!!! thats one hell of a line up!!!!

do you put nutrients in the fog?

i like your tall dome!

 

[moe.red]

Yes same kinda thing as hydro nutes in the water which get carried with the fog.

 

[Stoneyluv]

Yes same kinda thing as hydro nutes in the water which get carried with the fog.

cool, i understand it is going to be a light solution to start but does it corrode or wear out the discs faster?

.

so i'm just gonna apologize now for all the questions i'm going to ask over the next four months!!!!

Now I’m gonna try to dry out this sieve from the small O2 concentrator. First gentle but if it resists it gets the vacuum oven treatment tomorrow. I’d like to have 2 working machines for what’s coming.

i've never seen any part of one up close like that, i'm intrigued for sure. what makes it wet that it need drying? is that what happen during the process of it functioning and what causes the limited life?

you need a live steam cam in your lab Moe!!!!

 

[moe.red]

lol I’ll share what I can but I am no expert on o2 fog. No one is. I’ve just got what worked and what hasn’t so far but I am far from dialed in. But the promise is there that it is worth the effort to pursue this.

Disks get dirty. Clean easily. Make sure you have a maint access door you can get to even during flower and then don’t give the ultrasonics a second thought they will be fine.

It might be easier to explain a lot of this on video. I’ll get that figured out.

 

[moe.red]

Seeds started




Fog clone tent ready to receive

View attachment IMG_4610.mov

 

[Observer]

Seeds started

View attachment 81405
View attachment 81406

Fog clone tent ready to receive

View attachment 81404

View attachment 81407
View attachment 81408

That TDS meter don't belong!? Lol

 

[Observer]

What are the blue things/doing next to the disc.

 

[Observer]

Curious how the fog is with the lid shut with the current fan speed, as in the density, from the fan moving the mist so quickly

 

[Nesta]

I’m here for it! The Han Solo looked ridiculous last time you grew it.

 

[moe.red]

What are the blue things/doing next to the disc.

Nothing gets past you.

Currently they are being sterilized in that water. Once the plants come over I run those airstones in an aquarium with an established colony of Bennie’s for a day then move them back here to seed the colonies in this system.

I’ll also be pushing o2 thru them

 

[Observer]

Nothing gets past you.

Currently they are being sterilized in that water. Once the plants come over I run those airstones in an aquarium with an established colony of Bennie’s for a day then move them back here to seed the colonies in this system.

I’ll also be pushing o2 thru them

Nice.

I'll probably just copy ur "chamber", on a smaller scale, once I can.

 

[moe.red]

Curious how the fog is with the lid shut with the current fan speed, as in the density, from the fan moving the mist so quickly

There is a pic with a net pot lifted a bit to see it. Fog everywhere. That coco is bone dry rn but will be moist in an hour.

 

[Observer]

There is a pic with a net pot lifted a bit to see it. Fog everywhere. That coco is bone dry rn but will be moist in an hour.

Yea, was thinking it might be a tad fast but with the lid sealed it's probably fine/perfect.

Growing in Clouds.

 

[moe.red]

I’m here for it! The Han Solo looked ridiculous last time you grew it.

I remember you want a cut. I only have 2 seeds left but the best one will be a mom.

 

[Observer]

Ionic Cloud "Substrate"*

Hehe

 

[moe.red]

Yea, was thinking it might be a tad fast but with the lid sealed it's probably fine/perfect.

Growing in Clouds.

Don’t forget all the roots that are coming soon. They block the air a fair amount

 

[Observer]

Don’t forget all the roots that are coming soon. They block the air a fair amount

2 fans, 1 each side ?

For "balance/eveness"?

 

[moe.red]

@SomewhatPurpleish tagging you in on this grow since you will be the one doing it

 

[Observer]

Nothing gets past you.

 

[SomewhatPurpleish]

<- me for this entire grow

Something something something Watched Pot

 

[moe.red]

2 fans, 1 each side ?

For "balance/eveness"?

Not necessary imo. Also every fan you put in takes away from plant sites. Roots growing into fans = bad. Ask me how I know.

 

[Stoneyluv]

There is a pic with a net pot lifted a bit to see it. Fog everywhere. That coco is bone dry rn but will be moist in an hour.

is it just coco and perlite? nuthin else?

 

[moe.red]

is it just coco and perlite? nuthin else?

Yeah and that’s cause I didn’t have just coco. I want these netpots to act more like a gasket than a sieve. Hold in the o2. But if you are not running o2 yes you want perlite as well.




@SomewhatPurpleish is doing the hands on here

View attachment IMG_4614.mov

 

[Observer]

Yeah and that’s cause I didn’t have just coco. I want these netpots to act more like a gasket than a sieve. Hold in the o2. But if you are not running o2 yes you want perlite as well.

View attachment 81419


@SomewhatPurpleish is doing the hands on here

View attachment 81420
View attachment 81421

And that's all u do for the VGs

Cant wait till I get mine

 

[Stoneyluv]

And that's all u do for the VGs

Cant wait till I get mine

i'm gonna ask Bandit for the files for his newer model and print you a couple of those as well... but for now i got this much done for ya so far, just gotta print out the wavy piece yet..

 

[moe.red]

i'm gonna ask Bandit for the files for his newer model and print you a couple of those as well... but for now i got this much done for ya so far, just gotta print out the wavy piece yet..

View attachment 81428

I have not seen that version. Spare a guy an stl? Or whatever you use I can convert.

 

[Stoneyluv]

I have not seen that version. Spare a guy an stl? Or whatever you use I can convert.

it's the XL version.. holds 22 sprouts. i believe Steam and I are the only two with them,, and soon Obs.. and you..

3D design XL VG rez - Tinkercad

3D design XL VG rez created by Stoneyluv with Tinkercad

www.tinkercad.com

3D design XL VG cover - Tinkercad

3D design XL VG cover created by Stoneyluv with Tinkercad

www.tinkercad.com

3D design Copy of Wavy Gravy Wall - Tinkercad

3D design Copy of Wavy Gravy Wall created by Stoneyluv with Tinkercad

www.tinkercad.com

this was the one Bandit had he smokey and the bandit truck as a rez.. i made a smaller rez with a pocket to hold the wavy gravy wall and a cover for it all.

 

[moe.red]

it's the XL version.. holds 22 sprouts. i believe Steam and I are the only two with them,, and soon Obs.. and you..

3D design XL VG rez - Tinkercad

3D design XL VG rez created by Stoneyluv with Tinkercad

www.tinkercad.com

3D design XL VG cover - Tinkercad

3D design XL VG cover created by Stoneyluv with Tinkercad

www.tinkercad.com

3D design Copy of Wavy Gravy Wall - Tinkercad

3D design Copy of Wavy Gravy Wall created by Stoneyluv with Tinkercad

www.tinkercad.com

this was the one Bandit had he smokey and the bandit truck as a rez.. i made a smaller rez with a pocket to hold the wavy gravy wall and a cover for it all.

@SomewhatPurpleish print a few of these out for the big group of seeds that are up next.

 

[MDK]

@SomewhatPurpleish print a few of these out for the big group of seeds that are up next.

I'm getting amped up

 

[moe.red]

View attachment 81446
I'm getting amped up

If I had the graphics skills there’s a lot that could be done with that gif…

 

[steamroller]

Good to see new blood here~!
Welcome @SomewhatPurpleish ~!
I have the [ one and only ] original VG by Bandit and the beast by Stoney~!

^The Original I expect to be donated some day to the Cannabis Hall of Fame in Bandits name.^


^ The Beast^

 

[Stoneyluv]

If I had the graphics shills there’s a lot that could be done with that gif…

 

[MDK]

View attachment 81468

All glizzed up

Not a bad chop n paste haha

 

[Zen_seeker]

@SomewhatPurpleish tagging you in on this grow since you will be the one doing it

My sons going to be doing the winter grow here.

Trying to get him to use the brothers KRIV account as they stopped using it. Get him to interact with other BB 3D printer guys and growers. We’ll see…

 

[moe.red]

My sons going to be doing the winter grow here.

Trying to get him to use the brothers KRIV account as they stopped using it. Get him to interact with other BB 3D printer guys and growers. We’ll see…

Sorry, KRIV?

 

[moe.red]

Free shit. Hmmmm